Transcode from VLC (MPEG2 stream)

[AlSoft]

Hi, please Help me!

I'm try to transcode Stream from VLC (MPEG2). VLC show that:

stream1
Type: Video
Codec: MPEG-1/2 Video (mpgv)
Resolution: 704x576
Ferq: 50
Stream2
Type: Audio
Codec: MPEG Audio layer 1/2/3 (mpga)
Lang: Russian
Channels: Stereo
Freq: 48000Hz
Bitrate: 192 Kbit/s

i send this stream to WOWZA by UDP (legacy)
:sout=#duplicate{dst=udp{dst=xxx.xxx.xxx.xxx:10000 },dst=display} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep

and wowza write in log
WARN server comment 2012-01-19 15:58:25 - - - - - 13.881 - - - - - - - - LiveReceiver.startDataPacket[live/_definst_/myStream_360p.stream]: Data packet sync issue.

what is i`m doing wrong ?
sorry for my English

[rrlanham]

Are you able to play the stream in LiveVideoStreaming example player?

Server: rtmp://[wowza-address]:1935/live
Stream: myStream_360p

Richard

[AlSoft]

no, and this error in log is permanently
many many strings

[rrlanham]

What is myStream? You are using VLC, I would expect a .stream file or StreamNameAlias alias

Are you doing something like this, but with mpeg 2?:
http://www.wowza.com/forums/content....rver-(MPEG-TS)

If so, then you want to follow this guide to start the stream:
http://www.wowza.com/forums/content....based-encoder)

Try encoding and starting a stream following these guides, then playback.

Server: rtmp://[wowza-address]:1935/live
Stream: mpegts.stream

If the above plays, and the Wowza Transcoder is enabled with default transrate.xml, then this should work:

Server: rtmp://[wowza-address]:1935/live
Stream: mpegts.stream_360p

Richard

[AlSoft]

no no no i use VLC ONLY to transmit stream from my local net to WOWZA server. i dont use any transcode option in VLC
when i try to publish and play mpegts.stream

Server: rtmp://[wowza-address]:1935/live
Stream: mpegts.stream

Ican`t see video and in the log i have strings about Data packet sync issue.

This error starting always when i try to publish stream in stream Manager....

[AlSoft]

when i try to send this stream into another wowza server (2/2/0) it work good.
video doesnt work but into log no errors about sync only unformat....

[rrlanham]

Scratch the playback of source in that case. Send mpeg2 from VLC to transcoder and playback:

Server: rtmp://[wowza-address]:1935/live
Stream: mpegts.stream_360p

Richard

[AlSoft]

when i turn off transcode
<Transcoder>
<!-- To turn on transcoder set to: transcoder -->
<LiveStreamTranscoder>none</LiveStreamTranscoder>

and play my stream
Server: rtmp://[wowza-address]:1935/live
Stream: mpegts.stream
server comments
LiveStreamPacketizerSanJose.handlePacket[live/_definst_/mpegts.stream][mp4a.40.33]: MP3 Audio: Audio is not MPEG1 Layer 3. May not be playable by Flash player.

but if i set
<Transcoder>
<!-- To turn on transcoder set to: transcoder -->
<LiveStreamTranscoder>transcoder</LiveStreamTranscoder>
In log write many strings about
LiveReceiver.startDataPacket[live/_definst_/myStream_360p.stream]: Data packet sync issue.

[AlSoft]

Richard, at all thanks for all your comments!!!
Can i send my stream to some yuor wowza server, that you will see on it ?? please, i have no any ideas...

[randall]

If you are using VLC why use MPEG2? You can use VLC to transcode to h.264. This can be done from the VLC GUI.