load balancer problem, i will make payment with paypal to helper.

[djcenk]

I want to load balance between 2 server, since one week i was try but not work
I am using wowza for shoutcast live transcoding only.
first server running 100% loaded.
second server running 0% loaded.
i want to use both at 50% loaded .
which one must be loadbalancer, which one must be a edge or origin server.
Thank you in advance to those who will help.

[rrlanham]

Take a look at the Wowza Load Balancer Addon here:

http://www.wowza.com/forums/content....ncing-solution

Richard

[rrlanham]

Also, with Shoutcast, you don't need Liverepeater (origin/edge). The shoutcast server is the origin, and each of your servers is re-streaming from that source. So you just need to distribute connections to each, and all you need for that is the Load Balancer Addon

Richard

[djcenk]

unfortunately i cant run successfully this module ago 1 week.
Not working, i was try everything.

[charlie]

Try shutting down both Wowza Media Servers then delete the following file:

/usr/local/WowzaMediaServer/conf/Server.guid

Then re-start both servers. See if now you see both servers in the load balancer. Send us the output of the load balancer request:

http://[load-balancer-ip-address]:1935/loadbalancer?serverInfoXML

Charlie

[djcenk]

thank you charlie i will try.
those servers which one must be loadbalancer ? which one must be a edge ?
thank you

[charlie]

Your question is not clear. Please explain in more detail.

Charlie

[djcenk]

Your question is not clear. Please explain in more detail.

Charlie

sorry for my bad english

my first server is working full capacity. 100%
I want setup second server for load balance with first server.
I can use only shoutcast application on first server.
how can i load balance between those servers
thank you.

[charlie]

You can use SHOUTcast on both servers. It is probably the best method to scale. Just setup both servers to pull the SHOUTcast stream from the same source and use the load balancer to balance the load between them.

Charlie

[djcenk]

my load balancer status page.(second server 0% load)

- <LoadBalancerServerInfo>
- <LoadBalancerServer>
<connectCount>429</connectCount>
<status>RUNNING</status>
<redirectCount>0</redirectCount>
<lastMessage>1 second 78 milliseconds</lastMessage>
<redirect>*.*.*.*</redirect>
<serverId>*-*-*-*-*</serverId>
</LoadBalancerServer>
</LoadBalancerServerInfo>

but not a traffic load in this server.