How to set up live stream repeater edge for Adobe HTTP Dynamic Streaming (sanjosestreaming)

Note: This article is for an older Wowza™ product or technology that either has been updated or is no longer supported. For the current version of this article, see How to configure a live stream repeater.
Live stream repeater is a method for delivering a single live stream across a multiple server deployment to many viewers. The setup uses an origin/edge configuration where the source stream is published to an origin server and the stream is made available for playback on multiple edge servers. This article provides instructions for setting up the live stream repeater to stream a live stream when using Adobe HTTP Dynamic Streaming (Adobe HDS) protocol.

Live Stream Repeater (San Jose Streaming)

  1. Download and install Wowza Media Server on the origin server and all edge servers.
  2. Configure the origin server (for more information, see How to configure a live stream repeater). You should use an application with StreamType set to live or rtp-live (or a variant).
  3. Create a new Wowza Media Server application on each of the edge servers:
    1. Create the folder [install-dir]/applications/liveedge.
    2. Create the folder [install-dir]/conf/liveedge and copy the [install-dir]/conf/Application.xml file to this new folder.
    3. Open the newly copied Application.xml file in a text editor and make the following changes:
      • Change the Streams/StreamType property value to:
      • Set the Streams/LiveStreamPacketizers property value to:
      • Set the Repeater/OriginURL property value as follows:
        Where [origin-ip-address] is the IP address of the origin server.
  4. Start Wowza Media Server.
  5. Send a stream to the origin server or use Stream Manager to start the stream on the origin server.
  6. To play using Adobe Flash Player (San Jose/Adobe HTTP Dynamic Streaming):

    Wowza Media Server 3.5
    Double-click [install-dir]/examples/LiveVideoStreaming/FlashHTTPPlayer/player.html, enter the information below, and then click the Connect button.

    Wowza Media Server 3.1.2 and earlier
    Double-click [install-dir]/examples/LiveVideoStreaming/clientOSMF/bin-release/LiveOSMFPlayer.html, enter the information below, and then click the Play button.
    Stream: http://[edge-ip-address]:1935/liveedge/[stream-name]/manifest.f4m
    Where [edge-ip-address] is the IP address of one of the edge servers running Wowza Media Server and [stream-name] is the name of the live stream being sent to the origin server.


  • For redundancy, you can define multiple origin servers for a single stream by specifying two origin URLs separated by the pipe (|) character. For example:
  • The above setup defines a single origin server per-application. Each stream that's played through that application will use the Repeater/OriginURL value to locate the origin server for that stream. You can also configure per-stream routing by using stream names that include the full path to the source stream. This must be done using either the StreamNameAlias AddOn or .stream files. For example, to use this method to repeat the stream wowz://[origin-ip-address]/live/_defininst_/myStream using the .stream file method, you would create the file [install-dir]/content/ on each of the edge servers with the following content:
    Where [origin-ip-address] is the ip address of the origin server.

    In Adobe Flash Player, you would then use the following URL to play the stream:
  • The WOWZ™ protocol is a new TCP-based messaging protocol in Wowza Media Server 3.5 and is used for server-to-server communication. It's enabled by default. If one of the Wowza Media Servers in the origin/edge configuration isn't running Wowza Media Server 3.5, an RTMP connection will be established between the servers instead.