Results 1 to 7 of 7

Thread: Wirecast -> wowza3 transcoder

  1. #1
    Join Date
    Nov 2010
    Posts
    21

    Default Wirecast -> wowza3 transcoder

    Has anyone had success using wirecast4 with the wowza3 transcoder?

    I have wirecast set to H.264 with output format=flash, and when I start the stream wowza crashes.

    I can't see anything else that would cause this, does anyone have an example encoder setup for wirecast to wowza transcoder?

    Thanks,
    Steve.

  2. #2

    Default

    Hi,

    Can you post your transcoder xml file ? or the bits you have changed so us to look at ?

    Shamrock

  3. #3
    Join Date
    Nov 2010
    Posts
    21

    Default

    Hi Shamrock,

    Here's my Application.xml:

    <Root>
    <Application>
    <!-- Uncomment to set application level timeout values
    <ApplicationTimeout>60000</ApplicationTimeout>
    <PingTimeout>12000</PingTimeout>
    <ValidationFrequency>8000</ValidationFrequency>
    <MaximumPendingWriteBytes>0</MaximumPendingWriteBytes>
    <MaximumSetBufferTime>60000</MaximumSetBufferTime>
    <MaximumStorageDirDepth>25</MaximumStorageDirDepth>
    -->
    <Connections>
    <AutoAccept>true</AutoAccept>
    <AllowDomains></AllowDomains>
    </Connections>
    <!--
    StorageDir path variables

    ${com.wowza.wms.AppHome} - Application home directory
    ${com.wowza.wms.ConfigHome} - Configuration home directory
    ${com.wowza.wms.context.VHost} - Virtual host name
    ${com.wowza.wms.context.VHostConfigHome} - Virtual host config directory
    ${com.wowza.wms.context.Application} - Application name
    ${com.wowza.wms.context.ApplicationInstance} - Application instance name

    -->
    <Streams>
    <StreamType>live</StreamType>
    <StorageDir>${com.wowza.wms.context.VHostConfigHome}/content</StorageDir>
    <KeyDir>${com.wowza.wms.context.VHostConfigHome}/keys</KeyDir>
    <!-- LiveStreamPacketizers (separate with commas): cupertinostreamingpacketizer, smoothstreamingpacketizer, sanjosestreamingpacketizer, cupertinostreamingrepeater, smoothstreamingrepeater, sanjosestreamingrepeater, dvrstreamingpacketizer, dvrstreamingrepeater -->
    <LiveStreamPacketizers>cupertinostreamingpacketizer,smoothstreamingpacketizer,sanjosestreamingpacket izer</LiveStreamPacketizers>
    <!-- Properties defined here will override any properties defined in conf/Streams.xml for any streams types loaded by this application -->
    <Properties>
    </Properties>
    </Streams>
    <Transcoder>
    <!-- To turn on transcoder set to: transcoder -->
    <LiveStreamTranscoder>transcoder</LiveStreamTranscoder>
    <!-- [templatename].xml or ${SourceStreamName}.xml -->
    <Templates>${SourceStreamName}.xml,transrate.xml</Templates>
    <ProfileDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/profiles</ProfileDir>
    <TemplateDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/templates</TemplateDir>
    <Properties>
    </Properties>
    </Transcoder>

    <DVR>
    <!-- As a single server or as an origin, use dvrstreamingpacketizer in LiveStreamPacketizers above -->
    <!-- Or, in an origin-edge configuration, edges use dvrstreamingrepeater in LiveStreamPacketizers above -->
    <!-- As an origin, also add dvrchunkstreaming to HTTPStreamers below -->

    <!-- To turn on DVR recording set Recorders to dvrrecorder. This works with dvrstreamingpacketizer -->
    <Recorders></Recorders>

    <!-- As a single server or as an origin, set the Store to dvrfilestorage-->
    <!-- edges should have this empty --> -->
    <Store></Store>

    <!-- Window Duration is length of live DVR window in seconds. 0 means the window is never trimmed. -->
    <WindowDuration>0</WindowDuration>

    <!-- Storage Directory is top level location where dvr is stored. e.g. c:/temp/dvr -->
    <StorageDir>${com.wowza.wms.context.VHostConfigHome}/dvr</StorageDir>

    <!-- valid ArchiveStrategy values are append, version, delete -->
    <ArchiveStrategy>append</ArchiveStrategy>

    <!-- If this is a dvrstreamingrepeater, define ChunkOriginURL to point back to origin -->
    <!-- And define Application/Repeater/OriginURL to point back to the origin -->
    <Repeater>
    <ChunkOriginURL></ChunkOriginURL>
    </Repeater>

    <!-- Properties for DVR -->
    <Properties>
    </Properties>
    </DVR>

    <!-- HTTPStreamers (separate with commas): cupertinostreaming, smoothstreaming, sanjosestreaming, dvrchunkstreaming -->
    <HTTPStreamers>cupertinostreaming,smoothstreaming,sanjosestreaming</HTTPStreamers>
    <SharedObjects>
    <StorageDir></StorageDir>
    </SharedObjects>
    <Client>
    <IdleFrequency>-1</IdleFrequency>
    <Access>
    <StreamReadAccess>*</StreamReadAccess>
    <StreamWriteAccess>*</StreamWriteAccess>
    <StreamAudioSampleAccess></StreamAudioSampleAccess>
    <StreamVideoSampleAccess></StreamVideoSampleAccess>
    <SharedObjectReadAccess>*</SharedObjectReadAccess>
    <SharedObjectWriteAccess>*</SharedObjectWriteAccess>
    </Access>
    </Client>
    <RTP>
    <!-- RTP/Authentication/[type]Methods defined in Authentication.xml. Default setup includes; none, basic, digest -->
    <Authentication>
    <PublishMethod>digest</PublishMethod>
    <PlayMethod>none</PlayMethod>
    </Authentication>
    <!-- RTP/AVSyncMethod. Valid values are: senderreport, systemclock, rtptimecode -->
    <AVSyncMethod>senderreport</AVSyncMethod>
    <MaxRTCPWaitTime>12000</MaxRTCPWaitTime>
    <IdleFrequency>75</IdleFrequency>
    <RTSPSessionTimeout>90000</RTSPSessionTimeout>
    <RTSPMaximumPendingWriteBytes>0</RTSPMaximumPendingWriteBytes>
    <RTSPBindIpAddress></RTSPBindIpAddress>
    <RTSPConnectionIpAddress>0.0.0.0</RTSPConnectionIpAddress>
    <RTSPOriginIpAddress>127.0.0.1</RTSPOriginIpAddress>
    <IncomingDatagramPortRanges>*</IncomingDatagramPortRanges>
    <!-- Properties defined here will override any properties defined in conf/RTP.xml for any depacketizers loaded by this application -->
    <Properties>
    </Properties>
    </RTP>
    <MediaCaster>
    <!-- Properties defined here will override any properties defined in conf/MediaCasters.xml for any MediaCasters loaded by this applications -->
    <Properties>
    </Properties>
    </MediaCaster>
    <MediaReader>
    <!-- Properties defined here will override any properties defined in conf/MediaReaders.xml for any MediaReaders loaded by this applications -->
    <Properties>
    </Properties>
    </MediaReader>
    <MediaWriter>
    <!-- Properties defined here will override any properties defined in conf/MediaWriter.xml for any MediaWriter loaded by this applications -->
    <Properties>
    </Properties>
    </MediaWriter>
    <LiveStreamPacketizer>
    <!-- Properties defined here will override any properties defined in conf/LiveStreamPacketizers.xml for any LiveStreamPacketizers loaded by this applications -->
    <Properties>
    </Properties>
    </LiveStreamPacketizer>

    <HTTPStreamer>
    <!-- Properties defined here will override any properties defined in conf/HTTPStreamers.xml for any HTTPStreamer loaded by this applications -->
    <Properties>
    </Properties>
    </HTTPStreamer>
    <Repeater>
    <OriginURL></OriginURL>
    <QueryString><![CDATA[]]></QueryString>
    </Repeater>
    <Modules>
    <Module>
    <Name>base</Name>
    <Description>Base</Description>
    <Class>com.wowza.wms.module.ModuleCore</Class>
    </Module>
    <Module>
    <Name>properties</Name>
    <Description>Properties</Description>
    <Class>com.wowza.wms.module.ModuleProperties</Class>
    </Module>
    <Module>
    <Name>logging</Name>
    <Description>Client Logging</Description>
    <Class>com.wowza.wms.module.ModuleClientLogging</Class>
    </Module>
    <Module>
    <Name>flvplayback</Name>
    <Description>FLVPlayback</Description>
    <Class>com.wowza.wms.module.ModuleFLVPlayback</Class>
    </Module>
    </Modules>
    <!-- Properties defined here will be added to the IApplication.getProperties() and IApplicationInstance.getProperties() collections -->
    <Properties>
    </Properties>
    </Application>
    </Root>

  4. #4

    Default

    thanks for the Application.xml can you post your

    ${SourceStreamName}.xml,transrate.xml from the

    /transcoder/templates

    or are you using the defaults ?

    Shamrock

  5. #5
    Join Date
    Nov 2010
    Posts
    21

    Default

    I'm just using the defaults.

    Steve.

  6. #6

    Default

    Probably worth sending a screen shot of your encoder settings, and your Wowza log file output to support@wowza.com so it can be duplicated and tracked down.

    Shamrock

  7. #7
    Join Date
    Nov 2010
    Posts
    21

    Default

    Okay, just sent them off.

Similar Threads

  1. which java for wowza3?
    By romild0 in forum General Forum
    Replies: 2
    Last Post: 04-23-2012, 06:35 AM
  2. Wowza3, transcoder add-on, and FreeBSD
    By markho in forum AddOn: Transcoder
    Replies: 4
    Last Post: 02-13-2012, 07:49 PM
  3. Incoming multicast Wowza3
    By Lelik1985 in forum General Forum
    Replies: 13
    Last Post: 10-29-2011, 03:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •