Wowza Community

Changing pmt/pat insertion frequency in MPEG-TS stream

Hi,

I use Wowza media server 3.0 as a VoD (RTSP) server for STBs.

The server streams AAC files using MPEG-TS packets.

I have two questions:

1- How may i force RTSP server output to use UDP instead of RTP?

2- How can i change Packetizer to increase PMT/PAT insertion?

Thanks in advance

I answered your same question here.

You put the properties in the wrong place.

You have:

<Property>
	<Name>rtpDePacketizerWrapper</Name>
	<Value>com.wowza.wms.rtp.depacketizer.RTPDePacketizerWrapperReChunkMPEGTS</Value>
</Property>
<Property>
	<Name>forceMPEGTSOut</Name>
	<Value>true</Value>
	<Type>Boolean</Type>
</Property>
<Property>
	<Name>rtpWrapMPEGTS</Name>
	<Value>true</Value>
	<Type>Boolean</Type>
</Property>
<!-- Properties defined here will override any properties defined in conf/RTP.xml for any depacketizers loaded by this application -->
<Properties>
</Properties>

should be:

<!-- Properties defined here will override any properties defined in conf/RTP.xml for any depacketizers loaded by this application -->
<Properties>
	<Property>
		<Name>rtpDePacketizerWrapper</Name>
		<Value>com.wowza.wms.rtp.depacketizer.RTPDePacketizerWrapperReChunkMPEGTS</Value>
	</Property>
	<Property>
		<Name>forceMPEGTSOut</Name>
		<Value>true</Value>
		<Type>Boolean</Type>
	</Property>
	<Property>
		<Name>rtpWrapMPEGTS</Name>
		<Value>true</Value>
		<Type>Boolean</Type>
	</Property>
</Properties>

tags inside of tags.

Charlie

the MediaCaster Property “forceInterleaved” only affects incoming streams.

Try adding these Property settings to the /conf/[app-name]/Application.xml /RTP /Properties list:

<Property>
<Name>forceMPEGTSOut</Name>
<Value>true</Value>
<Type>Boolean</Type>
</Property>
<Property>
<Name>rtpWrapMPEGTS</Name>
<Value>true</Value>
<Type>Boolean</Type>
</Property>

Richard

Thank you for your answer. But it dosen’t work for the two questions.

For point 1, i have follow steps described in https://www.wowza.com/docs/how-to-re-stream-video-from-an-ip-camera-rtsp-rtp-re-streaming#config.

I have added next XML tags to “conf/vod/Application.xml” file.


forceInterleaved

true

Boolean


But the server is still sending RTP packet instead of UDP packets.

For point 2 , steps in https://www.wowza.com/docs/how-to-control-video-and-audio-pid-and-streamids-for-outgoing-mpeg-ts describe Pid and Stream id changing , whereas what i need is the frequency of PAT and PMT insertion.

Best regards

I have added these properties but server is still sending RTP instead of UDP.

Below conf/vod/Application.xml.

Could you tell me what is wrong(server version is 3.0.3).

Thank you in advance.

true

default

${com.wowza.wms.context.VHostConfigHome}/content

${com.wowza.wms.context.VHostConfigHome}/keys

file was truncated

here the whole of file


<Root>
	<Application>
		<!-- Uncomment to set application level timeout values
		<ApplicationTimeout>60000</ApplicationTimeout>
		<PingTimeout>12000</PingTimeout>
		<ValidationFrequency>8000</ValidationFrequency>
		<MaximumPendingWriteBytes>0</MaximumPendingWriteBytes>
		<MaximumSetBufferTime>60000</MaximumSetBufferTime>
		<MaximumStorageDirDepth>25</MaximumStorageDirDepth>
		-->
		<Connections>
			<AutoAccept>true</AutoAccept>
			<AllowDomains></AllowDomains>
		</Connections>
		<!--
			StorageDir path variables
			
			${com.wowza.wms.AppHome} - Application home directory
			${com.wowza.wms.ConfigHome} - Configuration home directory
			${com.wowza.wms.context.VHost} - Virtual host name
			${com.wowza.wms.context.VHostConfigHome} - Virtual host config directory
			${com.wowza.wms.context.Application} - Application name
			${com.wowza.wms.context.ApplicationInstance} - Application instance name
			
		-->
		<Streams>
			<StreamType>default</StreamType>
			<StorageDir>${com.wowza.wms.context.VHostConfigHome}/content</StorageDir>
			<KeyDir>${com.wowza.wms.context.VHostConfigHome}/keys</KeyDir>
			<!-- LiveStreamPacketizers (separate with commas): cupertinostreamingpacketizer, smoothstreamingpacketizer, sanjosestreamingpacketizer, cupertinostreamingrepeater, smoothstreamingrepeater, sanjosestreamingrepeater, dvrstreamingpacketizer, dvrstreamingrepeater -->
			<LiveStreamPacketizers></LiveStreamPacketizers>
			<!-- Properties defined here will override any properties defined in conf/Streams.xml for any streams types loaded by this application -->
			<Properties>
			</Properties>
		</Streams>
		<Transcoder>
			<!-- To turn on transcoder set to: transcoder -->
			<LiveStreamTranscoder></LiveStreamTranscoder>
			<!-- [templatename].xml or ${SourceStreamName}.xml -->
			<Templates>${SourceStreamName}.xml,transrate.xml</Templates>
			<ProfileDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/profiles</ProfileDir>
			<TemplateDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/templates</TemplateDir>
			<Properties>
			</Properties>
		</Transcoder>
		<DVR>
			<!-- As a single server or as an origin, use dvrstreamingpacketizer in LiveStreamPacketizers above -->
			<!-- Or, in an origin-edge configuration, edges use dvrstreamingrepeater in LiveStreamPacketizers above -->
			<!-- As an origin, also add dvrchunkstreaming to HTTPStreamers below -->
			<!-- To turn on DVR recording set Recorders to dvrrecorder.  This works with dvrstreamingpacketizer  -->
			<Recorders></Recorders>
			<!-- As a single server or as an origin, set the Store to dvrfilestorage-->
			<!-- edges should have this empty --> -->
			<Store></Store>
			<!--  Window Duration is length of live DVR window in seconds.  0 means the window is never trimmed. -->
			<WindowDuration>0</WindowDuration>
			<!-- Storage Directory is top level location where dvr is stored.  e.g. c:/temp/dvr -->
			<StorageDir>${com.wowza.wms.context.VHostConfigHome}/dvr</StorageDir>
			<!-- valid ArchiveStrategy values are append, version, delete -->
			<ArchiveStrategy>append</ArchiveStrategy>
			<!-- If this is a dvrstreamingrepeater, define ChunkOriginURL to point back to origin -->
			<!-- And define Application/Repeater/OriginURL to point back to the origin -->
			<Repeater>
				<ChunkOriginURL></ChunkOriginURL>
			</Repeater>
			<!-- Properties for DVR -->
			<Properties>
			</Properties>
		</DVR>
		<!-- HTTPStreamers (separate with commas): cupertinostreaming, smoothstreaming, sanjosestreaming, dvrchunkstreaming -->
		<HTTPStreamers>cupertinostreaming,smoothstreaming,sanjosestreaming</HTTPStreamers>
		<SharedObjects>
			<StorageDir></StorageDir>
		</SharedObjects>
		<Client>
			<IdleFrequency>-1</IdleFrequency>
			<Access>
				<StreamReadAccess>*</StreamReadAccess>
				<StreamWriteAccess>*</StreamWriteAccess>
				<StreamAudioSampleAccess></StreamAudioSampleAccess>
				<StreamVideoSampleAccess></StreamVideoSampleAccess>
				<SharedObjectReadAccess>*</SharedObjectReadAccess>
				<SharedObjectWriteAccess>*</SharedObjectWriteAccess>
			</Access>
		</Client>
		<RTP>
			<!-- RTP/Authentication/[type]Methods defined in Authentication.xml. Default setup includes; none, basic, digest -->
			<Authentication>
				<PublishMethod>none</PublishMethod>
				<PlayMethod>none</PlayMethod>
			</Authentication>
			<!-- RTP/AVSyncMethod. Valid values are: senderreport, systemclock, rtptimecode -->
			<AVSyncMethod>senderreport</AVSyncMethod>
			<MaxRTCPWaitTime>12000</MaxRTCPWaitTime>
			<IdleFrequency>75</IdleFrequency>
			<RTSPSessionTimeout>90000</RTSPSessionTimeout>
			<RTSPMaximumPendingWriteBytes>0</RTSPMaximumPendingWriteBytes>
			<RTSPBindIpAddress></RTSPBindIpAddress>
			<RTSPConnectionIpAddress>0.0.0.0</RTSPConnectionIpAddress>
			<RTSPOriginIpAddress>127.0.0.1</RTSPOriginIpAddress>
			<IncomingDatagramPortRanges>*</IncomingDatagramPortRanges>
                	<Property>
    				<Name>rtpDePacketizerWrapper</Name>
    				<Value>com.wowza.wms.rtp.depacketizer.RTPDePacketizerWrapperReChunkMPEGTS</Value>
			</Property>
			<Property>
                        	<Name>forceMPEGTSOut</Name>
                        	<Value>true</Value>
                        	<Type>Boolean</Type>
                	</Property>
                	<Property>
                        	<Name>rtpWrapMPEGTS</Name>
                        	<Value>true</Value>
                        	<Type>Boolean</Type>
                	</Property>
			<!-- Properties defined here will override any properties defined in conf/RTP.xml for any depacketizers loaded by this application -->
			<Properties>
			</Properties>
		</RTP>
		<MediaCaster>
			<!-- Properties defined here will override any properties defined in conf/MediaCasters.xml for any MediaCasters loaded by this applications -->
			<RTP>
				<RTSP>
				<!-- udp, interleave -->
					<RTPTransportMode>interleave</RTPTransportMode>
				</RTSP>
			</RTP>
			<Property>
    			<Name>forceInterleaved</Name>
    				<Value>true</Value>
    				<Type>Boolean</Type>
			</Property>
		</MediaCaster>
		<MediaReader>
			<!-- Properties defined here will override any properties defined in conf/MediaReaders.xml for any MediaReaders loaded by this applications -->
			<Properties>
			</Properties>
		</MediaReader>
		<MediaWriter>
			<!-- Properties defined here will override any properties defined in conf/MediaWriter.xml for any MediaWriter loaded by this applications -->
			<Properties>
			</Properties>
		</MediaWriter>
		<LiveStreamPacketizer>
			<!-- Properties defined here will override any properties defined in conf/LiveStreamPacketizers.xml for any LiveStreamPacketizers loaded by this applications -->
			<Properties>
			</Properties>
		</LiveStreamPacketizer>
		<HTTPStreamer>
			<!-- Properties defined here will override any properties defined in conf/HTTPStreamers.xml for any HTTPStreamer loaded by this applications -->
			<Properties>
			</Properties>
		</HTTPStreamer>
		<Repeater>
			<OriginURL></OriginURL>
			<QueryString><![CDATA[]]></QueryString>
		</Repeater> 
		<Modules>
			<Module>
				<Name>base</Name>
				<Description>Base</Description>
				<Class>com.wowza.wms.module.ModuleCore</Class>
			</Module>
			<Module>
				<Name>properties</Name>
				<Description>Properties</Description>
				<Class>com.wowza.wms.module.ModuleProperties</Class>
			</Module>
			<Module>
				<Name>logging</Name>
				<Description>Client Logging</Description>
				<Class>com.wowza.wms.module.ModuleClientLogging</Class>
			</Module>
			<Module>
				<Name>flvplayback</Name>
				<Description>FLVPlayback</Description>
				<Class>com.wowza.wms.module.ModuleFLVPlayback</Class>
			</Module> 
		</Modules>
		<!-- Properties defined here will be added to the IApplication.getProperties() and IApplicationInstance.getProperties() collections -->
		<Properties>
		</Properties>
		<Property>
			<Name>forceMPEGTSOut</Name>
			<Value>true</Value>
			<Type>Boolean</Type>
		</Property>
		<Property>
    			<Name>rtpWrapMPEGTS</Name>
    			<Value>true</Value>
    			<Type>Boolean</Type>
		</Property>
	</Application>
</Root>