Results 1 to 5 of 5

Thread: Air FLV damaged

  1. #1
    Join Date
    Mar 2012
    Posts
    4

    Default Air FLV damaged

    Has anyone tried to manually select the type of encoder to output to (FLV)?

    Im not sure but I think it is Sorensen as default - I will need to switch it to VP6.

    Anyone knows the answer?

    Thanks!

  2. #2
    Join Date
    Mar 2012
    Posts
    4

    Default

    just saw that the FLV from the WOWZA output is a "FLV1" codec...

    anyone knows how to output these FLVs using VP6?

  3. #3

    Default

    If the encoding is one of the supported types Wowza will record it. So, to record in VP6 you must send the stream to Wowza encoded as VP6.

  4. #4
    Join Date
    Mar 2012
    Posts
    4

    Default

    Im using Flash builder (AIR) - how do I sent it as VP6?

    Are you saying that Flex or Flash is doing the encoding? I had the impression that WOWZA was doing it.

    Thanks for your reply.

  5. #5

    Default

    Yes, Flex/Flash is the encoder as it is sending the data to Wowza. You'll have to check the Flex documentation for how to change the codec.

Similar Threads

  1. Replies: 4
    Last Post: 10-01-2013, 11:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •