Results 1 to 6 of 6

Thread: Connect rtsp from edge live repreater

  1. #1

    Default Connect rtsp from edge live repreater

    Hi
    I have 2 problem
    1. I can play connect live stream from original Wowza server by VLC --> RTSP --> Wowza3 but Can't play by Android?
    URL - "rtsp://wowzaip:1935/live-origin/stream"

    2. How to setting live repreater for PLAY RTSP from edge.? VLC --> RTSP --> Wowza Edge - - > Wowza Origin.
    If rtmp live-repreater is work but not work if play by rtsp.

    Thank

  2. #2
    Join Date
    Sep 2011
    Posts
    1,933

    Default

    Hi
    The set-up for a live repeater is documented in this tutorial,
    http://www.wowza.com/forums/content....ose-Streaming)

    Note that you will have to change configuration a little
    Example :
    <LiveStreamPacketizers>sanjosestreamingrepeater</LiveStreamPacketizers>

    could be lift blank,
    <LiveStreamPacketizers></LiveStreamPacketizers>

    Playback useing VLC :
    rtsp://[edge-ip-address]:1935/liveedge/[stream-name]

    Can you give me the codec information for the Video/Audio from the source, this may be the problem with the Andriod device not being able to play the stream.

    Jason
    Last edited by JasonH; 04-17-2012 at 05:54 AM.

  3. #3

    Default

    Thank Jason

    I send stream from FMLE 3.2 --> Video H.264 baseline 3.2 (320x240 & 640x480)/ audio Stero 44100 Hz

  4. #4
    Join Date
    Sep 2011
    Posts
    1,933

    Default

    Hi
    Its suggested that you use baseline 3.0 or lower for streaming to mobile phones and handheld devices.
    Try changing the baseline to 3.0 and let me know if this solves thew issue.

    Jason

  5. #5

    Default

    Thank you it rtsp video work,
    and I think Android can't support MP3 audio right?

  6. #6
    Join Date
    Sep 2011
    Posts
    1,933

    Default

    Hi
    Yes that's correct for android you need AAC

    Jason

Similar Threads

  1. Block connect unknown in Edge
    By Xsplit in forum Server Administration Discussion
    Replies: 2
    Last Post: 01-29-2013, 04:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •