Results 1 to 6 of 6

Thread: Wowza as relay server

  1. #1

    Default Wowza as relay server

    Hi,

    I would like to setup relay server (in middle of 2 Wowza Server). I am wondering which StreamType would be more appropraite for application to behave as Relay Server?

    live (origin) => liverepeater-edge-origin (Relay) => liverepeater-edge

    OR

    live (origin) => liverepeater-edge (Relay) => liverepeater-edge

    OR

    live (origin) => liverepeater-origin (Relay) => liverepeater-edge

    Thanks,
    S

  2. #2
    Join Date
    Sep 2011
    Posts
    1,934

    Default

    Hi
    In my opinion the set-up should be like this :

    live (origin) => liverepeater-edge (Relay) => liverepeater-edge

    Jason

  3. #3

    Default

    Thanks Jason for quickly responding.

    This server will be doing RTMP and HLS, does this impact anyway?

    Also do I need to keep all streams running between live and relay for HLS out?

  4. #4
    Join Date
    Sep 2011
    Posts
    1,934

    Default

    Hi
    If you're using a origin url you need to make sure that the cupertinostreamingrepeater is enabled at the origin server.
    If you're using a .stream file then the packetization is done on the edge server by enabling cupertinostreamingpacketizer.

    You will need to keep all streams running between live and relay for HLS out.

    Jason

  5. #5

    Default

    If I do not keep it running, how much delay customer can expierence with HLS?

  6. #6
    Join Date
    Dec 2007
    Posts
    21,962

    Default

    Actually, don't use cupertinostreamingrepeater on the origin. Refer to this guide for standard Liverepeater configuration:
    http://www.wowza.com/forums/content....er-Quick-Start

    And take a look at this guide for a variation that packetizes on the edge:
    http://www.wowza.com/forums/content....erepeater-edge

    To mitigate start time for HLS streams, take a look at this guide:
    http://www.wowza.com/forums/content....rameters-(iOS)

    Richard

Similar Threads

  1. RTSP Relay server
    By WonSeok Seo in forum General Forum
    Replies: 2
    Last Post: 03-05-2013, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •