Results 1 to 4 of 4

Thread: Source: UDP Multicast (IP-TV channels) Destination: WebSite (rtmp)

  1. #1
    Join Date
    Jun 2012
    Posts
    1

    Default Source: UDP Multicast (IP-TV channels) Destination: WebSite (rtmp)

    Hello, we tryin to organize web broadcast on our site, and searching for the tool that fit for our conditions. For this moment we using 30 day trial, and we going to buy this product if everything goes allright.

    We have 2 interfaces on our server :

    first : 169.10.10.10 - through this interface, we obtain 4 ip-tv channels, here is the m3u playlist:
    #EXTM3U
    #EXTINF:0,1. nvk 1
    udp://@224.14.10.1:5050
    #EXTINF:0,2. nvk 2
    udp://@224.14.10.2:5050
    #EXTINF:0,3. nvk 3
    udp://@224.14.10.3:5050
    #EXTINF:0,4. nvk 4
    udp://@224.14.10.4:5050
    video stream from these channels have following settings:
    Stream 0:
    Type: Video
    Original ID: 300
    Codec: MGEP-1/2 Video (mpgv)
    Resolution: 720x576
    Frame rate: 50
    
    Stream 1:
    Type: Audio
    Original ID: 301
    Codec: MPEG Audio layer 1/2/3 (mpga)
    Channels: Dual-mono
    Sample rate: 48000 Hz
    Bitrate: 192 kb/s
    second : 94.245.1.5 - though this interface video goes to the users;

    We have read this -
    http://www.wowza.com/forums/content....based-encoder)
    tutorial and do everything as there said, but when we push play button on live.html test page it shows:
    Failed to play mpegts.stream; stream not found.
    what we are doing wrong?

    what should be in mpegts.stream file in our case?
    we tried to put like this:
    udp://@224.14.10.4:5050
    or
    udp://224.14.10.4:5050
    or
    udp://224.14.10.4:10000
    or
    udp://169.10.10.10:10000
    nothing helps.
    Last edited by tal1982; 06-21-2012 at 09:05 PM.

  2. #2
    Join Date
    Oct 2013
    Posts
    2

    Default

    i have exact same problem, using mpeg.stream not working
    did u solve it? how? any1 please?

    bump

  3. #3

    Default

    What encoder are you using?

    Make sure your .stream file is in the [install-dir]/content directory and does not have a .txt file extension. also make sure the file is named mpegts.stream

    Do you see any clues to the problem in the access logs?

    Salvadore

  4. #4
    Join Date
    Aug 2013
    Posts
    2

    Default

    Quote Originally Posted by salvadore View Post
    What encoder are you using?

    Make sure your .stream file is in the [install-dir]/content directory and does not have a .txt file extension. also make sure the file is named mpegts.stream

    Do you see any clues to the problem in the access logs?

    Salvadore
    Yes, it is .stream with no .txt file extension. my stream works fine in local before wowza with udp://@iport
    When i check logs why its streaming out i get this from wowza:

     server comment - VHost.startStartupStreams: Stream successfully started [live/_definst_]: flv:ch1.stream
    INFO server comment - Server.startShutdownHook: Start server shutdown hook
    INFO server comment - Wowza Media Server is started!
    INFO server comment - RTPSessionDescriptionDataProviderBasic.getStreamInfo[live/_definst_]: URI: udp://@227.10.20.80:1234
    INFO stream create - -
    INFO server comment - RTPDePacketizerMPEGTS.init: Drop incomplete video frames
    INFO stream publish ch1.stream -
    INFO server comment - MulticastTransport.bind[live/_definst_]: 227.10.20.80/1234
    INFO server comment - RTPMediaCaster.Reconnector[923425825:live/_definst_:ch1.stream]: done: 1
    INFO server comment - RTPMediaCaster.streamTimeout[923425825:live/_definst_:ch1.stream]: timeout:12000 diff:12024 reason:101
    INFO server comment - RTPMediaCaster.resetConnection[923425825:live/_definst_:ch1.stream]:
    INFO server comment - RTPMediaCaster.closeRTPSession[923425825:live/_definst_:ch1.stream]
    INFO server comment - MulticastTransport.unbind[live/_definst_]: 227.10.20.80/1234 sent:0 recv:0
    INFO server comment - RTPMulticastListener.run(stop)
    INFO stream unpublish ch1.stream -
    INFO stream destroy ch1.stream -
    INFO server comment - RTPMediaCaster.Reconnector[923425825:live/_definst_:ch1.stream]: start: 2
    INFO server comment - RTPSessionDescriptionDataProviderBasic.getStreamInfo[live/_definst_]: URI: udp://@227.10.20.80:1234
    INFO stream create - -
    INFO server comment - RTPDePacketizerMPEGTS.init: Drop incomplete video frames
    INFO server comment - MulticastTransport.bind[live/_definst_]: 227.10.20.80/1234
    INFO stream publish ch1.stream -
    INFO server comment - RTPMediaCaster.Reconnector[923425825:live/_definst_:ch1.stream]: done: 2
    INFO server comment - ServerShutdownHook.run[shutdown]
    INFO vhost vhost-stop _defaultVHost_ -
    INFO application app-stop _definst_ live/_definst_
    INFO server comment - RTPMediaCaster.shutdown[923425825:live/_definst_:ch1.stream]: ch1.stream
    INFO server comment - RTPMediaCaster.disconnect[923425825:live/_definst_:ch1.stream]
    INFO server comment - RTPMediaCaster.closeRTPSession[923425825:live/_definst_:ch1.stream]
    INFO server comment - MulticastTransport.unbind[live/_definst_]: 227.10.20.80/1234 sent:0 recv:0
    INFO stream unpublish ch1.stream -
    INFO server comment - RTPMulticastListener.run(stop)
    INFO stream destroy ch1.stream -

    Seems like it stream out, but then some how crash and it stop streaming, please help!

Similar Threads

  1. Dual NIC support to convert UDP multicast to RTMP
    By jnamics in forum General Forum
    Replies: 2
    Last Post: 03-20-2014, 04:34 PM
  2. UDP Unicast ---> (UDP Multicast, RTSP Live Streaming)
    By konukko in forum Live Streaming and Encoder Discussion
    Replies: 1
    Last Post: 12-07-2013, 12:51 AM
  3. UDP Multicast video source to Wowza Media Server
    By thanmakara in forum Live Streaming and Encoder Discussion
    Replies: 0
    Last Post: 04-13-2013, 01:53 AM
  4. multicast in rtmp(udp->rtmp)
    By lifeIsGame in forum General Forum
    Replies: 0
    Last Post: 04-05-2013, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •