Ok so i got a live video stream and i want to record, but it only makes 1 KB files. I tried recording a shoutcast stream and this works, using the same module. By the way, the .stream file must contain this? udp://0.0.0.0:10000
i also get this error in wowza_error.log
WARN server comment 2012-10-29 12:17:58 - - - - - 585965.072 - - - - - - - - QTWriterUtils.loadForAppendParseMOOV[C:\Program Files (x86)\Wowza Media Systems\Wowza Media Server 3.0.5\content\29\dom_13.mp4]: WARNING: Append: The ‘stsc’ atom has incorrect sample count information: missingSampleCount:15 lastChunkCount:2 lastSamplesPerChunk:7 totalSampleCount:123 samplesAccountedFor:108
You have to describe more about what you are doing. The 1k file is not a good recording. Are you using an mpegts encoder? Are you starting in StreamManager? You can use MediaCaster type “rtp-record”
Richard
You do not use StreamManager in this case, and you do not use StreamType “rtp-live”. Those are for pulling streams, for example from an IP camera. An RTMP live encoder like FMLE pushes a stream to Wowza.
With a RTMP live encoder, use StreamType “live”. Enter the RTMP URL to that application in the FMS URL box, and enter a stream name, then click the “Start” button. If you run Wowza in stand-alone (/bin/startup.bat) mode and watch the log output in the console, you will immediately see a publish event when you start the encoder. Then you can playback that stream. Follow this tutorial for configuration and playback URLs:
https://www.wowza.com/docs/how-to-set-up-live-streaming-using-an-rtmp-based-encoder
Richard
The source has to be h.264 video and mp3 or aac audio to record to mp4 container.
Richard
Perhaps it was a network problem that caused the 1mb file. Are you using this method?
https://www.wowza.com/docs/how-to-record-a-live-stream-on-a-live-stream-repeater-edge
Try it again.
Richard
Can you provide enough detail about the source, encoding, origin-edge setup and exactly how you are recording so that I can replicate? Send that to support@wowza.com along with /conf and /logs folders. Include a link to this thread for reference
Richard
i’m trying to record a live video/audio stream. Im using adobe live media encoder, and yes im starting from stream manager, i tried rtp-record and the same. My application name is /moni. In adobe live encoder the fms url i eneter is rtmp://ip/moni. This is my application.xml
<Root>
<Application>
<!-- Uncomment to set application level timeout values
<ApplicationTimeout>60000</ApplicationTimeout>
<PingTimeout>12000</PingTimeout>
<ValidationFrequency>8000</ValidationFrequency>
<MaximumPendingWriteBytes>0</MaximumPendingWriteBytes>
<MaximumSetBufferTime>60000</MaximumSetBufferTime>
<MaximumStorageDirDepth>25</MaximumStorageDirDepth>
-->
<Connections>
<AutoAccept>true</AutoAccept>
<AllowDomains></AllowDomains>
</Connections>
<!--
StorageDir path variables
${com.wowza.wms.AppHome} - Application home directory
${com.wowza.wms.ConfigHome} - Configuration home directory
${com.wowza.wms.context.VHost} - Virtual host name
${com.wowza.wms.context.VHostConfigHome} - Virtual host config directory
${com.wowza.wms.context.Application} - Application name
${com.wowza.wms.context.ApplicationInstance} - Application instance name
-->
<Streams>
<StreamType>live</StreamType>
<StorageDir>${com.wowza.wms.context.VHostConfigHome}/content</StorageDir>
<KeyDir>${com.wowza.wms.context.VHostConfigHome}/keys</KeyDir>
<!-- LiveStreamPacketizers (separate with commas): cupertinostreamingpacketizer, smoothstreamingpacketizer, sanjosestreamingpacketizer, cupertinostreamingrepeater, smoothstreamingrepeater, sanjosestreamingrepeater -->
<LiveStreamPacketizers>cupertinostreamingpacketizer,smoothstreamingpacketizer,sanjosestreamingpacketizer</LiveStreamPacketizers>
<!-- Properties defined here will override any properties defined in conf/Streams.xml for any streams types loaded by this application -->
<Properties>
</Properties>
</Streams>
<Transcoder>
<!-- To turn on transcoder set to: transcoder -->
<LiveStreamTranscoder></LiveStreamTranscoder>
<!-- [templatename].xml or ${SourceStreamName}.xml -->
<Templates>${SourceStreamName}.xml,transrate.xml</Templates>
<ProfileDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/profiles</ProfileDir>
<TemplateDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/templates</TemplateDir>
<Properties>
</Properties>
</Transcoder>
<DVR>
<!-- As a single server or as an origin, use dvrstreamingpacketizer in LiveStreamPacketizers above -->
<!-- Or, in an origin-edge configuration, edges use dvrstreamingrepeater in LiveStreamPacketizers above -->
<!-- As an origin, also add dvrchunkstreaming to HTTPStreamers below -->
<!-- To turn on DVR recording set Recorders to dvrrecorder. This works with dvrstreamingpacketizer -->
<Recorders></Recorders>
<!-- As a single server or as an origin, set the Store to dvrfilestorage-->
<!-- edges should have this empty -->
<Store></Store>
<!-- Window Duration is length of live DVR window in seconds. 0 means the window is never trimmed. -->
<WindowDuration>0</WindowDuration>
<!-- Storage Directory is top level location where dvr is stored. e.g. c:/temp/dvr -->
<StorageDir>${com.wowza.wms.context.VHostConfigHome}/dvr</StorageDir>
<!-- valid ArchiveStrategy values are append, version, delete -->
<ArchiveStrategy>append</ArchiveStrategy>
<!-- If this is a dvrstreamingrepeater, define ChunkOriginURL to point back to origin -->
<!-- And define Application/Repeater/OriginURL to point back to the origin -->
<Repeater>
<ChunkOriginURL></ChunkOriginURL>
</Repeater>
<!-- Properties for DVR -->
<Properties>
</Properties>
</DVR>
<!-- HTTPStreamers (separate with commas): cupertinostreaming, smoothstreaming, sanjosestreaming, dvrchunkstreaming -->
<HTTPStreamers>cupertinostreaming,smoothstreaming,sanjosestreaming</HTTPStreamers>
<SharedObjects>
<StorageDir></StorageDir>
</SharedObjects>
<Client>
<IdleFrequency>-1</IdleFrequency>
<Access>
<StreamReadAccess>*</StreamReadAccess>
<StreamWriteAccess>*</StreamWriteAccess>
<StreamAudioSampleAccess></StreamAudioSampleAccess>
<StreamVideoSampleAccess></StreamVideoSampleAccess>
<SharedObjectReadAccess>*</SharedObjectReadAccess>
<SharedObjectWriteAccess>*</SharedObjectWriteAccess>
</Access>
</Client>
<RTP>
<!-- RTP/Authentication/[type]Methods defined in Authentication.xml. Default setup includes; none, basic, digest -->
<Authentication>
<PublishMethod>digest</PublishMethod>
<PlayMethod>none</PlayMethod>
</Authentication>
<!-- RTP/AVSyncMethod. Valid values are: senderreport, systemclock, rtptimecode -->
<AVSyncMethod>senderreport</AVSyncMethod>
<MaxRTCPWaitTime>12000</MaxRTCPWaitTime>
<IdleFrequency>75</IdleFrequency>
<RTSPSessionTimeout>90000</RTSPSessionTimeout>
<RTSPMaximumPendingWriteBytes>0</RTSPMaximumPendingWriteBytes>
<RTSPBindIpAddress></RTSPBindIpAddress>
<RTSPConnectionIpAddress>0.0.0.0</RTSPConnectionIpAddress>
<RTSPOriginIpAddress>127.0.0.1</RTSPOriginIpAddress>
<IncomingDatagramPortRanges>*</IncomingDatagramPortRanges>
<!-- Properties defined here will override any properties defined in conf/RTP.xml for any depacketizers loaded by this application -->
<Properties>
</Properties>
</RTP>
<MediaCaster>
<RTP>
<RTSP>
<!-- udp, interleave -->
<RTPTransportMode>interleave</RTPTransportMode>
</RTSP>
</RTP>
<!-- Properties defined here will override any properties defined in conf/MediaCasters.xml for any MediaCasters loaded by this applications -->
<Properties>
</Properties>
</MediaCaster>
<MediaReader>
<!-- Properties defined here will override any properties defined in conf/MediaReaders.xml for any MediaReaders loaded by this applications -->
<Properties>
</Properties>
</MediaReader>
<MediaWriter>
<!-- Properties defined here will override any properties defined in conf/MediaWriter.xml for any MediaWriter loaded by this applications -->
<Properties>
</Properties>
</MediaWriter>
<LiveStreamPacketizer>
<!-- Properties defined here will override any properties defined in conf/LiveStreamPacketizers.xml for any LiveStreamPacketizers loaded by this applications -->
<Properties>
</Properties>
</LiveStreamPacketizer>
<HTTPStreamer>
<!-- Properties defined here will override any properties defined in conf/HTTPStreamers.xml for any HTTPStreamer loaded by this applications -->
<Properties>
</Properties>
</HTTPStreamer>
<Repeater>
<OriginURL></OriginURL>
<QueryString><![CDATA[]]></QueryString>
</Repeater>
<Modules>
<Module>
<Name>base</Name>
<Description>Base</Description>
<Class>com.wowza.wms.module.ModuleCore</Class>
</Module>
<Module>
<Name>properties</Name>
<Description>Properties</Description>
<Class>com.wowza.wms.module.ModuleProperties</Class>
</Module>
<Module>
<Name>logging</Name>
<Description>Client Logging</Description>
<Class>com.wowza.wms.module.ModuleClientLogging</Class>
</Module>
<Module>
<Name>flvplayback</Name>
<Description>FLVPlayback</Description>
<Class>com.wowza.wms.module.ModuleFLVPlayback</Class>
</Module>
<Module>
<Name>ModuleLiveStreamRecord</Name>
<Description>ModuleLiveStreamRecord</Description>
<Class>com.wowza.wms.plugin.livestreamrecord.ModuleLiveStreamRecord</Class>
</Module>
<Module>
<Name>ModuleStreamRecord</Name>
<Description>File Management</Description>
<Class>streamrecord.hourly.monthlyrollover.ModuleStreamRecord</Class>
</Module>
</Modules>
<!-- Properties defined here will be added to the IApplication.getProperties() and IApplicationInstance.getProperties() collections -->
<Properties>
<Property>
<Name>starHour</Name>
<Value>00</Value>
<Type>Integer</Type>
</Property>
<Property>
<Name>endHour</Name>
<Value>24</Value>
<Type>Integer</Type>
</Property>
<Property>
<Name>timezone</Name>
<Value>GMT+02:00</Value>
<Type>String</Type>
</Property>
</Properties>
</Application>
</Root>
Hello,
I have a similar issue with the 1kb bad recording. Weird part is that recording works fine if I set the type to flv but not mp4.
Regards
Source is h.264 with aac using transcoder. This is happening on an edge repeater. The video is recorded under content folder with flv
Hi,
That is the method and it’s a consistent issue so not network related.
