Results 1 to 2 of 2

Thread: Edge/Origin setup compatible with addon modules

  1. #1
    Join Date
    Jan 2013

    Default Edge/Origin setup compatible with addon modules


    I read through edge/origin server setup and understand how it works but still have a few questions:

    1) Is dynamic stream alias possible with origin/edge setup?

    2) Is there a way to hide the origin stream? instead of rtmp://edge.ip/stream?origin.ip/stream just allow users to connect to rtmp://edge.ip/stream so they don't know the source address

    3) Is playing a stream on a edge server db-authentication supported?

    Most importantly, is the only difference between a edge/origin server just some config changes? are all the modules are compatible with each "type" (origin or edge) , etc.

  2. #2
    Join Date
    May 2013


    1. Yes

    2. You can utilize the OrignURL on the edges.

    3. You can add a module to the edge or origin respectively that can communicate externally to authorize allowed playback (edge) and/or publishing (origin). There are many applicable examples depending on what you are aiming for within our Media Security Overview.

    In general, there aren't a lot of configuration updates required to get setup running. Please see the following as you'll see the steps are minimal:

    Live Stream Repeater Guide

Similar Threads

  1. Edge origin issue with server side modules
    By sutharshan02 in forum Live Streaming and Encoders
    Replies: 3
    Last Post: 03-19-2014, 06:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts