Results 1 to 4 of 4

Thread: How can I do stress test connecting over RTMPTE?

  1. #1
    Join Date
    Mar 2013
    Posts
    5

    Question How can I do stress test connecting over RTMPTE?

    Hi,

    I'm going to perform stress test on the test server connecting over RTMPTE.
    WowzaMediaServer-loadtool-3.5.0 supports RTMP only.
    Do you have any advice to do stress test connecting over RTMPTE.

    Regards,
    k.inami

  2. #2
    Join Date
    Dec 2007
    Posts
    21,962

    Default

    Our suggestion is to use rtmp for the load test. It will give you a good idea of the server's and its network's capacity.

    Richard

  3. #3
    Join Date
    Mar 2013
    Posts
    5

    Default

    Hi,

    I tested my server using Load testing tool.
    CPU is used 100% at total 4,000 workers on my server.
    How do I have to account for the overhead for RTMPTE in my result? 25% or 50%?

    Regards,
    k.inami

  4. #4
    Join Date
    Dec 2007
    Posts
    21,962

    Default

    k.inami,

    Probably closer to 10% for cpu and ram, but you will have to see for sure. You have a baseline with RTMP to compare to. It should be about the same bandwidth consumption, and bandwidth is usually the limiting factor.

    Make sure your server is properly tuned

    Richard

Similar Threads

  1. stress test
    By bobmane in forum General Forum
    Replies: 4
    Last Post: 07-03-2012, 08:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •