Results 1 to 3 of 3

Thread: Connect flowplayer to live rtmp .sdp stream

  1. #1
    Join Date
    Apr 2013

    Default Connect flowplayer to live rtmp .sdp stream

    Having trouble trying to set up flowplayer to connect to a wowza live stream.

    flowplayer("player", "../flowplayer-3.2.7.swf",

    clip: {
    live: true,
    url: 'myStream',
    provider: 'rtmp',

    plugins: {
    rtmp: {
    url: '../flowplayer.rtmp-3.2.12.swf',
    netConnectionUrl: 'rtmp://x.x.x.x/live'
    When running Wowza there is no record of flowplayer trying to connect to wowza. Any ideas?

  2. #2
    Join Date
    Dec 2007


    See if you are able to reach Wowza from the machine you are testing the player by opening this url in a browser:


    You should see the Wowza version and Build number displayed. If not, and Wowza is running at that address, then TCP port 1935 is blocked. You have to allow in your firewall and if behind a NAT or connected to a router you have to map that port to the Wowza server. For routers you do port forwarding, and you can find instruction for most routers at


  3. #3
    Join Date
    Apr 2013


    I can get to that page from the web server. The web server and wowza are on different vlans on the internal network.

    So i figured out why it wasn't showing had the wrong version of flowplayer listed when i called the flowplayer. Now i can go the site and stream it internally, but am not able to view it externally. Is that a port issue going out from the web server and if so would it be the same port 1935?

Similar Threads

  1. How to streaming live rtmp with Flowplayer or JWplayer
    By dungbkhn in forum Live Streaming and Encoder Discussion
    Replies: 6
    Last Post: 11-26-2012, 01:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts