Results 1 to 3 of 3

Thread: Wowza HLS push to Akamai HLS config

  1. #1
    Join Date
    Jun 2013
    Posts
    14

    Default Wowza HLS push to Akamai HLS config

    Does anyone know if it is possible to get Wowza to push (HTTP POST) HLS video fragments and playlists to Akamai?

  2. #2
    Join Date
    Dec 2007
    Posts
    21,962

    Default

    No, this is not supported at present. It is a likely future feature, but I do not have any time frame.

    Richard

  3. #3
    Join Date
    Sep 2015
    Posts
    1

    Default

    Hello ,
    Can someone please explain to me how is Wowza HLS ingest to Akamai, suppose to work?
    I am using wowza stream engine 4.2.0.01 and the "Stream target" feature to push HLS streams to Akamai.
    I have followed http://www.wowza.com/forums/content....lishing)#WSE42 ,
    but I failed configuring a hls stream to be pushed to Akamai servers.
    These are the scenarios I have followed.

    First scenario:
    Hls input stream -> wowza live app -> enable Stream target -> Stream targer status: Active -> Ingest bit rate (akamai panel) = 0.0bps (It doesnt work)
    After that I opened checked the Monitoring (on wowza content panel) and I saw:
    Network Throughput
    Bytes In: 0 @ 0.000 bits/s
    Bytes Out: 0 @ 0.000 bits/s
    PS: the stream in hls, is a working stream.

    Second scenario:
    MPEG-TS input stream -> wowza live app -> enable Stream target -> Stream targer status: Active -> Ingest bit rate (akamai panel) = 12,040.399Kbps
    If the stream output from wowza server would have been "HLS format" the Ingest bit rate should have been approximately 3Mbps
    (or less, since that the "transcoder feature" is already activated in wowza live app and the max bit rate allowed is less that 3Mbps).

    Can someone advise please?

    Thank you in advance.
    Daniels

Similar Threads

  1. HLS push/pull to Edgecast
    By BargainsBeyond in forum Live Streaming and Encoders
    Replies: 6
    Last Post: 08-28-2014, 09:17 AM
  2. Wowza 4.0.3 and Akamai Push
    By anupam in forum Live Streaming and Encoders
    Replies: 5
    Last Post: 08-15-2014, 10:54 AM
  3. HLS Push
    By arsenm in forum General Forum
    Replies: 4
    Last Post: 05-28-2014, 02:03 PM
  4. Push Publish - HLS multibitrate support
    By sathishkumarkps in forum Live Streaming and Encoders
    Replies: 3
    Last Post: 05-07-2014, 07:40 PM
  5. Replies: 1
    Last Post: 03-15-2013, 08:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •