Results 1 to 7 of 7

Thread: MPEG TS and Teradek 255 Encoder

  1. #1
    Join Date
    May 2013
    Posts
    6

    Default MPEG TS and Teradek 255 Encoder

    Newbie. So apologize for y ignorance in advance

    Attempting to stream MPEG TS from Teradek Encoder (255) . Have followed instructions here http://www.wowza.com/forums/content....based-encoder)

    Below is log

    INFO application app-start _definst_ live/_definst_
    INFO server comment - RTPMediaCaster.create[1104632589]
    INFO server comment - RTPMediaCaster.init[1104632589]
    INFO server comment - RTPMediaCaster.Reconnector[1104632589:live/_definst_:mpegts.stream]: start: 1
    INFO server comment - HTTPStreamManager.onHTTPRequest: Publish stream successfully started [live/_definst_]: flv:mpegts.stream
    INFO server comment - RTPSessionDescriptionDataProviderBasic.getStreamInfo[live/_definst_]: URI: udp://0.0.0.0:10000
    INFO stream create - -
    INFO server comment - RTPDePacketizerMPEGTS.init: Drop incomplete video frames
    INFO server comment - RTPUDPTransport.bind[live/_definst_]: /0.0.0.0:10000
    INFO stream publish mpegts.stream -
    INFO server comment - RTPMediaCaster.Reconnector[1104632589:live/_definst_:mpegts.stream]: done: 1
    INFO server comment - RTPMediaCaster.streamTimeout[1104632589:live/_definst_:mpegts.stream]: timeout:12000 diff:12025 reason:101
    INFO server comment - RTPMediaCaster.resetConnection[1104632589:live/_definst_:mpegts.stream]:
    INFO server comment - RTPMediaCaster.closeRTPSession[1104632589:live/_definst_:mpegts.stream]
    INFO server comment - RTPUDPTransport.unbind[live/_definst_]: /0.0.0.0:10000 sent:0 recv:0
    INFO stream unpublish mpegts.stream -
    INFO stream destroy mpegts.stream -


    Any help with why stream fails would be appreciated

    Thanks

  2. #2

    Default

    Hi there, have a look at this guide for troubleshooting:
    How to troubleshoot RTSP/RTP playback

    Salvadore

  3. #3

    Default

    Also, make sure to follow this guide to set up the application:
    How to set up an application for RTSP/RTP streaming

    Salvadore

  4. #4
    Join Date
    May 2013
    Posts
    6

    Default

    Thanks Salvatore

    I dont appear to be getting that far . MPEG TS seems to crash on WOWZA server when I begin stream . Line below shows timeout with reason code 101, then stream is destroye

    INFO server comment - RTPMediaCaster.streamTimeout[1104632589:live/_definst_:mpegts.stream]: timeout:12000 diff:12025 reason:101

  5. #5

    Default

    When you see .bind statements with no "firstPacket" lines in the log before the .unbind lines means that UDP ports are blocked
    either in your server firewall or not mapped in a router to the Wowza machine, or some other point in your network.

    See the sections on ports and Networks in these articles:
    http://www.wowza.com/forums/content.php?45
    http://www.wowza.com/forums/content.php?62

    Salvadore

  6. #6
    Join Date
    Jul 2013
    Posts
    1

    Default

    Did you solve the problem?

    I have the same problem with RTP streaming.

    My log:

    INFO server comment - RTPMediaCaster.Reconnector[1009920161:live/_definst_:camera.stream]: start: 62
    INFO server comment - RTPSessionDescriptionDataProviderBasic.getStreamInfo[live/_definst_]: URI: udp://0.0.0.0:10000
    INFO stream create - -
    INFO server comment - RTPDePacketizerMPEGTS.init: Drop incomplete video frames
    INFO server comment - RTPUDPTransport.bind[live/_definst_]: /0.0.0.0:10000
    INFO stream publish camera.stream -
    INFO server comment - RTPMediaCaster.Reconnector[1009920161:live/_definst_:camera.stream]: done: 62
    INFO server comment - RTPMediaCaster.streamTimeout[1009920161:live/_definst_:camera.stream]: timeout:12000 diff:12021 reason:101
    INFO server comment - RTPMediaCaster.resetConnection[1009920161:live/_definst_:camera.stream]:
    INFO server comment - RTPMediaCaster.closeRTPSession[1009920161:live/_definst_:camera.stream]
    INFO server comment - RTPUDPTransport.unbind[live/_definst_]: /0.0.0.0:10000 sent:0 recv:0
    INFO stream unpublish camera.stream -
    INFO stream destroy camera.stream -

  7. #7

    Default

    FYI, not that this solves the MPEG-TS or RTP issues, but the Teradek's now support RTMP streaming. Update to firmware 6.2.5 or newer and you should see the RTMP option. Then publishing into Wowza is a breeze direct from the Cubes.

    --Chris

Similar Threads

  1. Transcode from MPEG-TS Encoder
    By AaronAtOptimal in forum AddOn: Transcoder
    Replies: 8
    Last Post: 10-02-2012, 07:19 AM
  2. Encoder Mpeg ts to Teradek cube device, help...
    By orselito in forum Live Streaming and Encoder Discussion
    Replies: 2
    Last Post: 09-29-2012, 04:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •