Wowza Community

Using wowza streaming engine UI - my server CPU takes more than 50 percent

Hi,

I start using Wowza streaming engine. I have to monitoring my server cpu percentage in command line.

When i create a new app or i restart the app after any changes or refresh the UI the CPU goes to 50%.

If i enable the Transcoder addon the CPU goes to 100% or some times the server stops automatically.

cat /proc/meminfo

MemTotal: 1015428 kB

MemFree: 85104 kB

Buffers: 2264 kB

Cached: 78708 kB

SwapCached: 0 kB

Active: 857620 kB

Inactive: 27992 kB

Active(anon): 804700 kB

Inactive(anon): 220 kB

Active(file): 52920 kB

Inactive(file): 27772 kB

Unevictable: 0 kB

Mlocked: 0 kB

SwapTotal: 0 kB

SwapFree: 0 kB

Dirty: 464 kB

Writeback: 0 kB

AnonPages: 804672 kB

Mapped: 19960 kB

Shmem: 280 kB

Slab: 19936 kB

SReclaimable: 6664 kB

SUnreclaim: 13272 kB

KernelStack: 3104 kB

PageTables: 8768 kB

NFS_Unstable: 0 kB

Bounce: 0 kB

WritebackTmp: 0 kB

CommitLimit: 507712 kB

Committed_AS: 863876 kB

VmallocTotal: 34359738367 kB

VmallocUsed: 2008 kB

VmallocChunk: 34359736311 kB

HardwareCorrupted: 0 kB

AnonHugePages: 0 kB

HugePages_Total: 0

HugePages_Free: 0

HugePages_Rsvd: 0

HugePages_Surp: 0

Hugepagesize: 2048 kB

DirectMap4k: 1048576 kB

DirectMap2M: 0 kB

cat /proc/cpuinfo

processor : 0

vendor_id : AuthenticAMD

cpu family : 21

model : 2

model name : AMD Opteron™ Processor 4332 HE

stepping : 0

microcode : 0x600081f

cpu MHz : 3000.060

cache size : 2048 KB

fpu : yes

fpu_exception : yes

cpuid level : 13

wp : yes

flags : fpu de tsc msr pae cx8 cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm rep_good nopl pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 popcnt aes f16c hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch xop tce tbm perfctr_core perfctr_nb arat cpb hw_pstate

bogomips : 6000.12

TLB size : 1536 4K pages

clflush size : 64

cache_alignment : 64

address sizes : 48 bits physical, 48 bits virtual

power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

This is my hardware specification. It is in Rackspace

the normal live stream when i refresh the UI or restart the App the cpu goes to 50 to 60 percentage without transcoding.

Thanks,

vinothc

What is the hardware specs, specifically CPU? Is it an Amazon Ec2? If so, you can’t use the lower ones with transcoder effectively.

Hi vinothc

You may well be hitting hardware constraints with that setup. One CPU core is on the low side. It appears that your machine also has only 1GB of memory. Please see our minimum and recommended specifications page:

http://www.wowza.com/products/streaming-engine/specifications

This becomes even more significant when doing transcoding, as you are witnessing. Are you able to increase resources at all?

Paul

Wowza Media Systems Support