Results 1 to 5 of 5

Thread: Camera mounted encoder

  1. #1

    Smile Camera mounted encoder

    Would this camera mounted encoder be compatible with Wowza Streaming Engine?

    http://www.vistek.ca/store/ProVideoC...input-usb.aspx

  2. #2
    Join Date
    Jun 2012
    Posts
    724

    Default

    Hello,

    The link you sent describes a Teradek Cube encoder.
    We have had several customers using successfully this encoder with their Wowza server installation.
    Normally, any encoder that is capable of publishing an RTMP or RTSP/RTP stream, as long as they are inline with these streaming protocols, should be compatible with Wowza server.

    Zoran

  3. #3

    Default

    Yep, the Teradek products work rather nicely with Wowza. If you are also using their Bond product you can actually install the Sputnik receiver software on your Linux-based Wowza server in the cloud, and it will deliver the stream directly to Wowza via the local interface without having to hop back out on the Internet. Just open ports 5111 and 1957.

  4. #4
    Join Date
    Jun 2015
    Posts
    1

    Default Teradek Bond II

    Quote Originally Posted by ianbeyer View Post
    Yep, the Teradek products work rather nicely with Wowza. If you are also using their Bond product you can actually install the Sputnik receiver software on your Linux-based Wowza server in the cloud, and it will deliver the stream directly to Wowza via the local interface without having to hop back out on the Internet. Just open ports 5111 and 1957.
    I just watched this video http://www.wowza.com/forums/content....reaming-Engine and it looks like Cube is integrated with wowza, but Bond II isn't?

    There isn't an area to add in the configuration URL. The only options in Stream settings in the Bond console is RTMP or Live Stream that is integrated with ustream. Does wowza work with the upgraded Bond II?

  5. #5

    Default

    Hello,

    The Bond II should will with Wowza Streaming Engine using the RTMP Streaming instructions on their QuickStart Guide.

    Broadcast Configuration

    RTMP Streaming

    1.Select RTMP as the Stream Mode.
    2.Enter the server URL. Depending on your destination (local server or CDN), this will look similar to rtmp://WowzaStreamingEngineAddress:1935/live.
    3.Enter the stream name. For many platforms this is found with the server URL.
    4.Click Apply.
    5.Start/stop the stream with the buttons on the Stream Settings page or with the Stream Joystick

    Best regards,
    Andrew

Similar Threads

  1. What IP camera should I use in order to publish audio back to the camera
    By mwallace in forum Live Streaming and Encoders
    Replies: 3
    Last Post: 06-03-2014, 09:34 AM
  2. combining or muxing ip camera and ip encoder audio to one signal
    By rochre in forum Wowza Streaming Engine functionality
    Replies: 0
    Last Post: 07-25-2013, 05:24 PM
  3. S3 mounted but file permission is wrong
    By azrilnazli in forum Wowza Media Server 3 for Amazon EC2 Discussion
    Replies: 2
    Last Post: 11-22-2011, 07:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •