Results 1 to 5 of 5

Thread: LiveStreamRecord - CFR(Constant Frame Rate) Mode

  1. #1
    Join Date
    Feb 2014
    Posts
    2

    Default LiveStreamRecord - CFR(Constant Frame Rate) Mode

    Hi.

    I'm developing LiveStreamRecord Application to record a live.
    I can record videos on mp4 correctly.
    But mp4 file is VFR frame rate mode.
    Is it possible to change CFR frame rate mode?

    Regards
    Kato

  2. #2

    Default

    Hello there,

    Wowza records what is sent in. You can use the Wowza Transcoder to achieve a consistent frame rate (as well as many other features):
    How to set up and run Wowza Transcoder AddOn for live streaming
    Wowza Transcoder AddOn Overview

    Salvadore

  3. #3
    Join Date
    Feb 2014
    Posts
    2

    Default

    Hello Savadore,

    Thank you for reply,
    Environment I'm using is as follows.
    Regardless of the transcoding, Our problem is to be a VFR mode. Because our Filebase transcoder does not work correctly.
    Therefore I would like to change CFR frame rate mode.

    Any ideas?

    ---
    [InputLiveSource]
    Sony IPCamera: SNC-VB630(http://www.sony.co.uk/pro/product/vi...b630/overview/)
    Source Video Info:
    Codec: H.264
    Resolution: 1920x1080 High@L4.1
    Framerate: 30 fps
    BitrateMode : CBR
    Bitrate : 8Mbps
    LiveSourceStreaming
    Protocol: RTSP
    WowzaStreamFile: vb630.stream(rtsp://IPAddress:554/media/video1)

    [Wowza Record File(Information using MediaInfo)]

    General
    name : vb630.stream_720p.mp4
    Format : MPEG-4
    Format profile : Adobe Flash
    Codec ID : f4v
    File size : 26.4 MiB
    Duration : 1Min 22Sec
    Overall bit rate mode : VBR Mode
    Overall bit rate : 2 688 Kbps
    Video Info
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : Main@L3.1
    Format settings, CABAC : Yes
    Format settings, ReFrames : 3 Frames
    Format settings, GOP : M=1, N=60
    Codec ID : avc1
    Codec ID/Info : Advanced Video Coding
    Duration : 1Min 22Sec
    Bit rate mode : VBR mode
    Bit rate : 2 589 Kbps
    Maximum bit rate : 1 430 Kbps
    Width : 1280
    Height : 720
    Display aspect ratio : 16:9
    ** Frame rate mode : VFR Mode **
    ** Frame rate : 29.970 fps **
    ** Original frame rate : 14.990 fps **
    ** Minimum frame rate : 29.412 fps **
    ** Maximum frame rate : 30.303 fps **
    Standard : NTSC
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bit
    Scan type : Progressive(PPF)
    Bits/(Pixel*Frame) : 0.094
    Stream size : 25.5 MiB (96%)
    Title : WowzaStreamingEngine
    ---

    Thanks in advance.
    Kato

  4. #4
    Join Date
    Dec 2007
    Posts
    21,962

    Default

    Hi Kato,

    Is the file a problem to use in anyway?

    Looking at a file recorded with Wowza HTTPLiveStreamRecord (but not a Transcoder rendition) with MediaInfo I see the same lines. These were from a recording made from mpeg-ts stream produced by VLC

    Frame rate mode : VFR
    Frame rate mode : Variable
    Frame rate : 23.212
    Frame rate : 23.212 fps
    Original frame rate : 24.000
    Original frame rate : 24.000 fps
    Minimum frame rate : 11.905
    Minimum frame rate : 11.905 fps
    Maximum frame rate : 24.390
    Maximum frame rate : 24.390 fps


    But when I playback the same file in RTMP client in Flash Builder, the onMetaData I see "videoframerate = 23.80952380952381"

    FFprobe reported 23.21 fps for the same stream.

    I cannot account for the slight difference in the reports of these 3rd party tools, but they agree closely.

    In a recording made from FMLE with 15ps and Key frame Frequency set to 3 seconds, the lines are the same but the range is much narrower:

    Frame rate mode : VFR
    Frame rate mode : Variable
    Frame rate : 15.026
    Frame rate : 15.026 fps
    Original frame rate : 15.000
    Original frame rate : 15.000 fps
    Minimum frame rate : 13.699
    Minimum frame rate : 13.699 fps
    Maximum frame rate : 16.129
    Maximum frame rate : 16.129 fps

    I also looked at recording from Wowza Transcoder renditions and it had similar info in MediaInfo. And I tried a recording with a template /Encode /KeyFrameInterval /FollowSource set to "false" on the VLC stream, but that no affect on the data shown in MediaInfo, it was the same range.

    Richard

  5. #5

    Default

    Has a solution to this been found? I'm streaming a file in Constant Frame Rate to Wowza, but Wowza records it to Variable Frame Rate. Is there a way to "force" it record in CBR?

    Thanks!

    Helder
    Last edited by HelderConde; 06-19-2015 at 10:26 AM.

Similar Threads

  1. Replies: 3
    Last Post: 12-05-2013, 05:32 PM
  2. Wowza and Akamai RTMP push, key frame interval are not constant.
    By jean-christophe in forum General Forum
    Replies: 12
    Last Post: 10-10-2013, 04:38 AM
  3. Is it possible to recors with frame rate of 1?
    By rubensd in forum Server-side Modules and Code Samples Discussion
    Replies: 2
    Last Post: 06-10-2013, 07:46 AM
  4. Transcode Frame Rate
    By Moresheth in forum AddOn: Transcoder
    Replies: 2
    Last Post: 05-01-2013, 12:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •