I’m using DVEO Magnus DVB-S-S2 and trying to setup multibitrate stream to be pushed to wowza via udp.
- I’m successfully sending single TS stream via UDP and using streammanager to start the stream.
stream file (test1.stream) udp://0.0.0.0:10000.
- When sending two bitrates both are sent on same port, the Master bitrate has PID 1 assigned and Member bitrate has PID 2.
On wowza side I’m creating two files
stream file (test11.stream) udp://0.0.0.0:10044?programID=1
stream file 2 (test12.stream) udp://0.0.0.0:10044?programID=2
On stream1 I get the signal it is streaming, on stream2 there is nothing happening.
Test: I have configured the same output to go on HTTP on the DVEO this way I can test the outgoing output in VLC player and when I opened in VLC both streams appear. So the PID configuration is ok.
Let me know if you noticing what is wrong with this scenario.
Regards,