Results 1 to 2 of 2

Thread: 64k bitrate EXT-X-TARGETDURATION value in HLS m3u8

  1. #1

    Default 64k bitrate EXT-X-TARGETDURATION value in HLS m3u8

    Hi, I'm using Wowza Engine with AWS s3 storage.

    I've implemented an adaptive bit-rate streaming.(12M, 6M, 3M, 64k)

    I checked each index files in the m3u8 file.
    Each value of EXT-X-TARGETDURATION was 10 but only 64k was 176.

    * Test streaming url : http://streaming.nextvr.net/vods3/_d.../playlist.m3u8

    Since that issue, when the bandwidth of internet was not good and after changing to 64k bit-rate streaming, the streaming bit-rate couldn't be changed.

    Is there any way for setting EXT-X-TARGETDURATION forcedly as 10 seconds even a bit-rate is 64k?

    -Larry

  2. #2

    Default

    Hello there.

    This may be an issue with your keyframe interval and fps settings from the encoder. Chunks must start on a keyframe, so it's best to use a keyframe interval that's a factor of the cupertinoChunkDurationTarget setting. For example, if cupertinoChunkDurationTarget is set to 10 seconds, use a keyframe interval of either 2, 2.5, 5, or 10 seconds.

    You might try smaller cupertinoChunkDurationTarget. Set the encoder keyframe interval to 30 with fps at 15 (2 second keyframe interval). Then you can set cupertinoChunkDurationTarget as low as 2000, each chunk will be 2 seconds, which 1/5 the size of your 10 second chunks. That should be more manageable for low bandwidth clients.

    I hope this helps.

    Kind regards,

    Salvadore

Similar Threads

  1. Replies: 1
    Last Post: 04-02-2014, 09:14 AM
  2. EXT-X-TARGETDURATION value not following setting nor real chunks info
    By tavius in forum Live Streaming and Encoder Discussion
    Replies: 3
    Last Post: 03-25-2013, 10:24 AM
  3. m3u8 without #EXT-X-TARGETDURATION
    By coolcloud in forum General Forum
    Replies: 3
    Last Post: 11-18-2012, 06:00 PM
  4. value of EXT-X-TARGETDURATION when using custom playstart/playduration
    By vlad312 in forum Video On Demand Streaming Discussion
    Replies: 8
    Last Post: 12-05-2011, 11:14 AM
  5. Replies: 5
    Last Post: 11-16-2011, 10:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •