Results 1 to 6 of 6

Thread: restream dvb-s

  1. #1
    Join Date
    Nov 2015
    Posts
    3

    Default restream dvb-s

    Hi!

    I have a IPTV system (client/server), that works well:

    Server

    OS: Linux

    Software for streaming by DVB-S or T card: Dvblast (videolan)

    Streaming out: RTP or UDP on the multicast address (example: BBC out on the 239.192.2.100:5501)

    pay attention: each channel has a different multicast-ip address

    STB(client)

    VLC (videolan): connected on RTP/UDP://239.192.2.100:5501 see the channel BBC


    Network:

    All connected in LAN

    Can the wowza streaming engine accept input udp or rtp? if yes, which is correct format of input? and restream it?

    thanks to all
    Last edited by cartelet; 11-11-2015 at 09:03 AM. Reason: explain

  2. #2

    Default

    Hi,

    Yes Wowza can accept a UDP source. You can see examples in this article. Essentially you create a stream file with a udp listener, which is constructed of an IP address (or all interfaces if set to udp://0.0.0.0) and a listener port.

    Wowza can restream this in various protocols. Note that the source needs to be H.264 in order to be playable, or if mpeg-ts then it can be transcoded to an H.264 output.


    Paul

  3. #3
    Join Date
    Nov 2015
    Posts
    3

    Default

    My source are channel sat/DTT and have a "Mpeg 2"(H.262) it's supported format?

  4. #4

    Default

    Wowza does not support Mpeg 2(h262)

    Please take a look at the supported codecs for streaming:
    Understanding streaming protocols and output file formats

    Also, review the supported codecs for Transcoder:
    How to set up and run Wowza Transcoder for live streaming

    regards,

    Salvadore

  5. #5
    Join Date
    Nov 2015
    Posts
    3

    Default

    ok thanks

    I try with mp4, I stream to wowza (called stream files in interface) with udp://239.192.2.145:10000 and connect the application with rtp out, and I see the video on vlc at this address:rtsp://10.0.0.78:5004/live/live.stream, I try to change in rtp but not work, can you help me?
    I think which this address is a unicast ?

    thanks

  6. #6
    Join Date
    Jun 2011
    Posts
    1,037

    Default

    Hi,
    If you want to push that stream out as rtp or udp multicast from Wowza Streaming Engine
    you can use one of these methods:

    How to use RTP to distribute live streams

    How to use MPEG-TS to distribute live streams

Similar Threads

  1. ReStream DVB receiver signal to Wowza Media Server
    By Gulale in forum Live Streaming and Encoder Discussion
    Replies: 3
    Last Post: 04-09-2014, 03:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •