Package com.wowza.wms.dvr

Interface IDvrConstants

All Superinterfaces:
IDvrPrivateConstants
public interface IDvrConstants extends IDvrPrivateConstants

  • Field Details

    • DVR_STREAMING_PACKETIZER_ID

      static final String DVR_STREAMING_PACKETIZER_ID
      The default DVR streaming packetizer ID: "dvrstreamingpacketizer".

      See DVR.xml and Application.xml.

      See Also:

    • DVR_REPEATER_PACKETIZER_ID

      static final String DVR_REPEATER_PACKETIZER_ID
      The default DVR streaming repeater ID: "dvrstreamingrepeater".

      See DVR.xml and Application.xml.

      See Also:

    • DVR_DEFAULT_RECORDER_ID

      static final String DVR_DEFAULT_RECORDER_ID
      The default DVR recorder ID: "dvrrecorder".

      See DVR.xml and Application.xml.

      See Also:

    • DVR_DEFAULT_FILESTORE

      static final String DVR_DEFAULT_FILESTORE
      The default DVR store ID: "dvrfilestorage".

      See DVR.xml and Application.xml.

      See Also:

    • MEDIACACHE_PREFIX

      static final String MEDIACACHE_PREFIX
      The MediaCache prefix for dvr repeater

      See MediaCache.xml

      See Also:

    • PROPERTY_CHUNK_GROUPING_SECONDS

      static final String PROPERTY_CHUNK_GROUPING_SECONDS
      DVR Property "dvrChunkGroupingSeconds": for determining how many seconds of DVR are stored in each stores sub-folder.

      The directory naming convention is HHHH_MM_SS with H = hours, M = minutes, S = seconds. Using the defaults, first directory would be named 0000_00_00 and the second directory would be named 0000_10_00, etc.

      Valid values are integers greater than 60. Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_CHUNK_GROUPING_SECONDS

      static final int DEFAULT_PROPERTY_CHUNK_GROUPING_SECONDS
      Default value for DVR Property "dvrChunkGroupingSeconds".

      Default value is 600 seconds (10 minutes).

      See Also:

    • PROPERTY_APPEND_DISCONTINUITY_DELTA

      static final String PROPERTY_APPEND_DISCONTINUITY_DELTA
      DVR Property "dvrAppendDiscontinuityDelta": for specifying how many milliseconds of empty space are put between individual recordings that when in append mode.

      Valid values are integers greater than or equal to 0. Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_APPEND_DISCONTINUITY_DELTA

      static final int DEFAULT_PROPERTY_APPEND_DISCONTINUITY_DELTA
      Default value for DVR Property "dvrAppendDiscontinuityDelta".

      Default value is 0.

      See Also:

    • PROPERTY_WINDOW_DURATION

      static final String PROPERTY_WINDOW_DURATION
      DVR Property "dvrWindowDuration": for specifying the DVR window duration, in seconds.

      Typically this is defined application-wide in Application.xml under Application/DVR/WindowDuartion However, to override this on a per stream basis, the property may be set on the IDvrStreamManager after creation and before initialization. Valid values are integers greater than or equal to 0. Add the property to Application/DVR/Properties section of Application.xml. The default is 0, meaning the window size is unlimited.

      See Also:

    • DVR_WINDOW_DURATION_UNLIMITED

      static final int DVR_WINDOW_DURATION_UNLIMITED
      See Also:

    • PROPERTY_STORAGE_DIRECTORY

      static final String PROPERTY_STORAGE_DIRECTORY
      DVR Property "dvrStorageDirectory": for overriding the DVR storage directory location Typically this is defined application-wide in Application.xml under Application/DVR/StorageDirectory. However, to override this on a per stream basis, the property may be set on the IDvrStreamManager after creation and before initialization.
      See Also:

    • DEFAULT_PROPERTY_STORAGE_DIRECTORY

      static final String DEFAULT_PROPERTY_STORAGE_DIRECTORY
      Default value for DVR Property "dvrStorageDirectory".

      Default value is "${com.wowza.wms.context.VHostConfigHome}/dvr".

      See Also:

    • PROPERTY_ARCHIVE_STRATEGY

      static final String PROPERTY_ARCHIVE_STRATEGY
      DVR Property "dvrArchiveStrategy": for specifying the DVR archive strategy.

      Typically this is defined application-wide in Application.xml under Application/DVR/ArchiveStrategy However, to override this on a per stream basis, the property may be set on the IDvrStreamManager after creation and before initialization. Valid values are:

      See Also:

    • ARCHIVE_STRATEGY_DELETE

      static final String ARCHIVE_STRATEGY_DELETE
      See Also:

    • ARCHIVE_STRATEGY_VERSION

      static final String ARCHIVE_STRATEGY_VERSION
      See Also:

    • ARCHIVE_STRATEGY_APPEND

      static final String ARCHIVE_STRATEGY_APPEND
      See Also:

    • PROPERTY_CHUNK_READER_CLASS

      static final String PROPERTY_CHUNK_READER_CLASS
      DVR Property "dvrChunkReaderClass": for controlling the class responsible for reading DVR Chunks.

      The class must implement IDvrChunkReader

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_CHUNK_READER_CLASS

      static final String DEFAULT_PROPERTY_CHUNK_READER_CLASS
      Default value for DVR Property "dvrChunkReaderClass".

      Default value is "com.wowza.wms.dvr.impl.io.DvrFileChunkReader".

      See Also:

    • PROPERTY_CHUNK_WRITER_CLASS

      static final String PROPERTY_CHUNK_WRITER_CLASS
      DVR Property "dvrChunkWriterClass": for controlling the class responsible for writing DVR Chunks.

      The class must implement IDvrChunkWriter

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_CHUNK_WRITER_CLASS

      static final String DEFAULT_PROPERTY_CHUNK_WRITER_CLASS
      Default value for DVR Property "dvrChunkWriterClass".

      Default value is "com.wowza.wms.dvr.impl.io.DvrFileChunkWriter".

      See Also:

    • PROPERTY_FILE_SYSTEM_CLASS

      static final String PROPERTY_FILE_SYSTEM_CLASS
      DVR Property "dvrFileSystemClass": for controlling the class responsible for managing the DVR File System.

      The class must implement IDvrFileSystem and may sub-class DvrDefaultFileSystem

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_FILE_SYSTEM_CLASS

      static final String DEFAULT_PROPERTY_FILE_SYSTEM_CLASS
      Default value for DVR Property "dvrFileSystemClass".

      Default value is "com.wowza.wms.dvr.impl.io.DvrDefaultFileSystem".

      See Also:

    • PROPERTY_MANIFEST_PERSISTER_CLASS

      static final String PROPERTY_MANIFEST_PERSISTER_CLASS
      DVR Property "dvrManifestPersisterClass": for controlling the class responsible for persisting the manifest files.

      The class must implement IDvrManifestPersister

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_MANIFEST_PERSISTER_CLASS

      static final String DEFAULT_PROPERTY_MANIFEST_PERSISTER_CLASS
      Default value for DVR Property "dvrManifestPersisterClass".

      Default value is "com.wowza.wms.dvr.impl.DvrManifestPersister".

      See Also:

    • PROPERTY_CHUNK_CACHE_CLASS

      static final String PROPERTY_CHUNK_CACHE_CLASS
      DVR Property "dvrChunkMemoryCacheClass": for controlling the class responsible for caching DVR chunks in memory.

      The class must implement IDvrChunkMemoryCache and may sub-class DvrDefaultChunkMemoryCache

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_CHUNK_CACHE_CLASS

      static final String DEFAULT_PROPERTY_CHUNK_CACHE_CLASS
      Default value for DVR Property "dvrChunkMemoryCacheClass".

      Default value is "com.wowza.wms.dvr.impl.DvrDefaultChunkMemoryCache".

      See Also:

    • PROPERTY_CHUNK_READ_CACHE_CLASS

      static final String PROPERTY_CHUNK_READ_CACHE_CLASS
      DVR Property "dvrChunkMemoryReadCacheClass": for controlling the class responsible for caching DVR chunks in memory.

      The class must implement IDvrChunkMemoryCache and may sub-class DvrDefaultChunkMemoryCache

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_CHUNK_READ_CACHE_CLASS

      static final String DEFAULT_PROPERTY_CHUNK_READ_CACHE_CLASS
      Default value for DVR Property "dvrChunkMemoryReadCacheClass".

      Default value is "com.wowza.wms.dvr.impl.DvrDefaultChunkMemoryCache".

      See Also:

    • PROPERTY_RECORDINGS_LOADER_CLASS

      static final String PROPERTY_RECORDINGS_LOADER_CLASS
      DVR Property "dvrRecordingsLoaderClass": for controlling the class responsible for loading DVR recordings.

      The class must implement IDvrRecordingsLoader

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_RECORDINGS_LOADER_CLASS

      static final String DEFAULT_PROPERTY_RECORDINGS_LOADER_CLASS
      Default value for DVR Property "dvrRecordingsLoaderClass".

      Default value is "com.wowza.wms.dvr.DvrRecordingsLoader".

      See Also:

    • PROPERTY_TEXT_WRITER_CLASS

      static final String PROPERTY_TEXT_WRITER_CLASS
      DVR Property "dvrTextWriterClass": for controlling the class responsible for writing DVR text files.

      The class must implement IDvrTextWriter

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_TEXT_WRITER_CLASS

      static final String DEFAULT_PROPERTY_TEXT_WRITER_CLASS
      Default value for DVR Property "dvrTextWriterClass".

      Default value is "com.wowza.wms.dvr.impl.io.DvrTextFileWriter".

      See Also:

    • PROPERTY_TEXT_READER_CLASS

      static final String PROPERTY_TEXT_READER_CLASS
      DVR Property "dvrTextReaderClass": for controlling the class responsible for reading DVR text files.

      The class must implement IDvrTextReader

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_TEXT_READER_CLASS

      static final String DEFAULT_PROPERTY_TEXT_READER_CLASS
      Default value for DVR Property "dvrTextReaderClass".

      Default value is "com.wowza.wms.dvr.impl.io.DvrTextFileReader".

      See Also:

    • PROPERTY_PACKET_SORTER_CLASS

      static final String PROPERTY_PACKET_SORTER_CLASS
      DVR Property "dvrPacketSorterClass": for controlling the class responsible for sorting packets received for recording.

      The class must implement ILivePacketSorter

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_PACKET_SORTER_CLASS

      static final String DEFAULT_PROPERTY_PACKET_SORTER_CLASS
      Default value for DVR Property "dvrPacketSorterClass".

      Default value is "com.wowza.wms.stream.live.LiveReceiverPacketSorter2".

      See Also:

    • PROPERTY_CHUNK_ID_CLASS

      static final String PROPERTY_CHUNK_ID_CLASS
      See Also:

    • DEFAULT_PROPERTY_CHUNK_ID_CLASS

      static final String DEFAULT_PROPERTY_CHUNK_ID_CLASS
      Internal DO NOT USE
      See Also:

    • PROPERTY_CHUNK_MBR_ALIGNER

      static final String PROPERTY_CHUNK_MBR_ALIGNER
      Internal DO NOT USE
      See Also:

    • DEFAULT_PROPERTY_MBR_CLASS_ALIGNER

      static final String DEFAULT_PROPERTY_MBR_CLASS_ALIGNER
      Internal DO NOT USE
      See Also:

    • DEFAULT_PROPERTY_PURGE_DEFAULT

      static final String DEFAULT_PROPERTY_PURGE_DEFAULT
      Internal DO NOT USE
      See Also:

    • PROPERTY_USE_SAX_PARSER

      static final String PROPERTY_USE_SAX_PARSER
      DVR Property "dvrUseSAXParser": for controlling the XML parser for DVR container manifests

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • PROPERTY_ALLOWABLE_AV_PACKET_DELTA

      static final String PROPERTY_ALLOWABLE_AV_PACKET_DELTA
      DVR Property "dvrAllowableAVPacketDelta": for specifying how much audio and video packets may diverge before triggering an error.

      Wowza nDVR expects the incoming audio and video to be aligned. Through this parameter, Wowza nDVR will try to compensate for out of alignment issues, but it cannot resolve them. This setting safeguards against audio and data video packets that are not closely aligned. The units are in ms. The default value is 2000 ms. If audio and video are out of alignment by more than this value, the audio and video chunks will be ignored in an attempt to get the streams back into alignment. If you already have an out of alignment issue, increasing the default value is likely to cause more problems. Increasing this value will increase the number of chunks not recorded which may cause the overall quality to be unacceptable.

      Add the property to Application/DVR/Properties section of Application.xml.

      See Also:

    • DEFAULT_PROPERTY_ALLOWABLE_AV_PACKET_DELTA

      static final int DEFAULT_PROPERTY_ALLOWABLE_AV_PACKET_DELTA
      Default value for DVR Property "dvrAllowableAVPacketDelta".

      Default value is 2000 ms.

      See Also:

    • PROPERTY_PACKET_DELTA_TO_RESET_TIME

      static final String PROPERTY_PACKET_DELTA_TO_RESET_TIME
      DVR Property "dvrResetTimePacketDelta": for controlling how much Chunk start times must diverge from last chunk's end time before the DVR time gets reset.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_PACKET_DELTA_TO_RESET_TIME

      static final int DEFAULT_PROPERTY_PACKET_DELTA_TO_RESET_TIME
      Default value for DVR Property "dvrResetTimePacketDelta".

      Default value is 200 ms.

      See Also:

    • PROPERTY_PACKET_DELTA_TO_NOTIFY

      static final String PROPERTY_PACKET_DELTA_TO_NOTIFY
      See Also:

    • DEFAULT_PROPERTY_PACKET_DELTA_TO_NOTIFY

      static final int DEFAULT_PROPERTY_PACKET_DELTA_TO_NOTIFY
      See Also:

    • PROPERTY_RECORD_DATA

      static final String PROPERTY_RECORD_DATA
      DVR Property "recordData": for determining if data should be recorded.

      Set property to: true to record data of incoming stream. Default is true. Set property to: false to ignore data packets during recording.

      See Also:

    • PROPERTY_RECORD_VIDEO

      static final String PROPERTY_RECORD_VIDEO
      DVR Property "recordVideo": for determining if video should be recorded.

      Set property to: true to record video of incoming stream. Default is true. Set property to: false to ignore video packets during recording. Either recordVideo or recordAudio property must be set to: true

      See Also:

    • PROPERTY_RECORD_AUDIO

      static final String PROPERTY_RECORD_AUDIO
      DVR Property "recordAudio": for determining if audio should be recorded.

      Set property to: true to record audio of incoming stream. Default is true. Set property to: false to ignore audio packets during recording. Either recordVideo or recordAudio property must be set to: true

      See Also:

    • PROPERTY_START_RECORDING_ON_STARTUP

      static final String PROPERTY_START_RECORDING_ON_STARTUP
      DVR Property "startRecordingOnStartup": for determining if DVR recorder should start recording immediately.

      Set property to: true (default) to start recording immediately when stream is detected. Set property to: false to init the DVR recorder but to not start recording immediately when stream starts.

      See Also:

    • PROPERTY_AUDIO_ONLY_CHUNK_TARGET_DURATION

      static final String PROPERTY_AUDIO_ONLY_CHUNK_TARGET_DURATION
      DVR Property "dvrAudioOnlyChunkTargetDuration": for target duration when recording audio-only.

      Applies to recording an audio-only stream and is the target chunk duration. The unit is in ms. The default value is 2000 ms. This setting is ignored if the stream contains video and audio, in which case the keyframe determines the chunk size.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_AUDIO_ONLY_CHUNK_TARGET_DURATION

      static final int DEFAULT_PROPERTY_AUDIO_ONLY_CHUNK_TARGET_DURATION
      Default value for DVR Property "dvrAudioOnlyChunkTargetDuration".

      Default value is 2000 ms.

      See Also:

    • PROPERTY_PACKET_SORT_TIME

      static final String PROPERTY_PACKET_SORT_TIME
      DVR Property "dvrPacketSortTime": for sorting incoming packets. Specified in milliseconds.

      Valid values are a integer greater than equal to 0. Zero means no sorting occurs. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_PACKET_SORT_TIME

      static final int DEFAULT_PROPERTY_PACKET_SORT_TIME
      Default value for DVR Property "dvrPacketSortTime".

      Default value is 0 ms (i.e. no sorting).

      See Also:

    • PROPERTY_BREAK_ON_PTS_MANIFEST

      static final String PROPERTY_BREAK_ON_PTS_MANIFEST
      DVR Property "dvrChunkBreakOnPTSManifest": for specifying that DVR manifest should use the PTS when dvrChunkBreakOnPTS is enabled.

      Valid values are "true" or "false" Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_BREAK_ON_PTS_MANIFEST

      static final boolean DEFAULT_PROPERTY_BREAK_ON_PTS_MANIFEST
      Default value for DVR Property "dvrChunkBreakOnPTSManifest".

      Default value is true.

      See Also:

    • PROPERTY_BREAK_ON_PTS

      static final String PROPERTY_BREAK_ON_PTS
      DVR Property "dvrChunkBreakOnPTS": for specifying that DVR should be broken on PTS.

      Valid values are "true" or "false" Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_BREAK_ON_PTS

      static final boolean DEFAULT_PROPERTY_BREAK_ON_PTS
      Default value for DVR Property "dvrChunkBreakOnPTS".

      Default value is true.

      See Also:

    • PROPERTY_REPEATER_SHARED_SECRET

      static final String PROPERTY_REPEATER_SHARED_SECRET
      DVR Property "dvrEncryptionSharedSecret": for encryption shared secret between origins and edges. In Origin-Edge scenarios when Wowza is using encryption, a shared secret must be defined for both origin and edges to encrypt the information sent between origin and edge so that encryption information is not revealed.

      A String values.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_REPEATER_HEARTBEAT_DURATION

      static final String PROPERTY_REPEATER_HEARTBEAT_DURATION
      DVR Property "dvrRepeaterHeartbeatDuration": for time in ms that origin pings edges

      A Integer Value.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_REPEATER_HEARTBEAT_DURATION

      static final int DEFAULT_PROPERTY_REPEATER_HEARTBEAT_DURATION
      See Also:

    • PROPERTY_CHUNK_DURATION_MINIMUM

      static final String PROPERTY_CHUNK_DURATION_MINIMUM
      DVR Property "dvrChunkDurationMinimum": for minimum chunk duration, in milliseconds.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_CHUNK_DURATION_MINIMUM

      static final int DEFAULT_PROPERTY_CHUNK_DURATION_MINIMUM
      Default value for DVR Property "dvrChunkDurationMinimum".

      Default value is 1500 ms.

      See Also:

    • PROPERTY_CHUNK_MEMORY_CACHESIZE

      static final String PROPERTY_CHUNK_MEMORY_CACHESIZE
      DVR Property "chunkMemoryCacheSize": used by DvrDefaultChunkMemoryCache to set number of chunks stored in DVR in-memory cache.

      Default value is DEFAULT_CHUNK_MEMORY_CACHESIZE

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_CACHESIZE

      static final int DEFAULT_CHUNK_MEMORY_CACHESIZE
      Default value for DVR Property "chunkMemoryCacheSize".

      Default value is 10 chunks.

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHE_STORE

      static final String DEFAULT_CHUNK_MEMORY_READ_CACHE_STORE
      Default value for DVR Property "chunkReadMemoryCacheStore".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_STORE

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHE_STORE

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHE_STORE
      DVR Property "chunkReadMemoryCacheStore": used by DvrDefaultChunkMemoryReadCache to enable caching for stores. It is a comma sepated list of store names.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_STORE

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHE_EXPIRE_AGE

      static final long DEFAULT_CHUNK_MEMORY_READ_CACHE_EXPIRE_AGE
      Default value for DVR Property "chunkReadMemoryCacheExpireAge".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_EXPIRE_AGE Do not put this too high.

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHE_EXPIRE_AGE

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHE_EXPIRE_AGE
      DVR Property "chunkReadMemoryCacheExpireAge": used by DvrDefaultChunkMemoryReadCache to set when a chunk should automatically be purged from the cache.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_EXPIRE_AGE

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHE_ENABLE

      static final boolean DEFAULT_CHUNK_MEMORY_READ_CACHE_ENABLE
      Default value for DVR Property "chunkReadMemoryCacheEnable".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_ENABLE.

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHE_ENABLE

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHE_ENABLE
      DVR Property "chunkReadMemoryCacheEnable": used by DvrDefaultChunkMemoryReadCache to enable read caching.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_ENABLE

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHE_GC_EXPIRE_FREQUENCY

      static final long DEFAULT_CHUNK_MEMORY_READ_CACHE_GC_EXPIRE_FREQUENCY
      Default value for DVR Property "chunkReadMemoryCacheGCExpireFrequency".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_GC_EXPIRE_FREQUENCY Do not put this too high.

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHE_GC_EXPIRE_FREQUENCY

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHE_GC_EXPIRE_FREQUENCY
      DVR Property "chunkReadMemoryCacheGCExpireFrequency": used by DvrDefaultChunkMemoryReadCache to set the how often an expire cycle runs.

      Default value is #DEFAULT_CHUNK_MEMORY_READ_CACHE_EXPIRE_FREQUENCY

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHE_MAX_EXPIRE_COUNT

      static final int DEFAULT_CHUNK_MEMORY_READ_CACHE_MAX_EXPIRE_COUNT
      Default value for DVR Property "chunkReadMemoryCacheMaxExpireCount".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_MAX_EXPIRE_COUNT

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHE_MAX_EXPIRE_COUNT

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHE_MAX_EXPIRE_COUNT
      DVR Property "chunkReadMemoryCacheMaxExpireCount": used by DvrDefaultChunkMemoryReadCache to set the amount of chunks to expire in each cycle.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_MAX_EXPIRE_COUNT

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHE_DEBUG

      static final boolean DEFAULT_CHUNK_MEMORY_READ_CACHE_DEBUG
      Default value for DVR Property "chunkReadMemoryCacheDebug".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_DEBUG

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHE_DEBUG

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHE_DEBUG
      DVR Property "chunkReadMemoryCacheDebug": used by DvrDefaultChunkMemoryReadCache to set the amount of memory for DVR in-memory read cache.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHE_DEBUG

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_VIDEO

      static final int DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_VIDEO
      Default value for DVR Property "chunkReadMemoryCacheVideoSize".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_VIDEO This is a buffer size for approximately 10 minutes of video at 500kbps

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHESIZE_VIDEO

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHESIZE_VIDEO
      DVR Property "chunkReadMemoryCacheVideoSize": used by DvrDefaultChunkMemoryReadCache to set the amount of memory for DVR in-memory read cache.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_VIDEO

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_AUDIO

      static final int DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_AUDIO
      Default value for DVR Property "chunkReadMemoryCacheAudioSize".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_AUDIO This is a buffer size for approximately 10 minutes of audio at 128kbps

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHESIZE_AUDIO

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHESIZE_AUDIO
      DVR Property "chunkReadMemoryCacheAudioSize": used by DvrDefaultChunkMemoryReadCache to set the amount of memory for DVR in-memory read cache.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_AUDIO

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_DATA

      static final int DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_DATA
      Default value for DVR Property "chunkReadMemoryCacheDataSize".

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_DATA This is a buffer size for approximately a random of amount of time based on different encoders sending different amounts of data

      See Also:

    • PROPERTY_CHUNK_MEMORY_READ_CACHESIZE_DATA

      static final String PROPERTY_CHUNK_MEMORY_READ_CACHESIZE_DATA
      DVR Property "chunkReadMemoryCacheDataSize": used by DvrDefaultChunkMemoryReadCache to set the amount of memory for DVR in-memory read cache.

      Default value is DEFAULT_CHUNK_MEMORY_READ_CACHESIZE_DATA

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_MBR_USE_UTC_FOR_ALIGNMENT

      static final String PROPERTY_MBR_USE_UTC_FOR_ALIGNMENT
      DVR Property "dvrMbrUseUtcForAlignment": when doing mbr alignment use utc time for alignment

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_MBR_ALIGNMENT_ALWAYS_START_AT_ZERO

      static final String PROPERTY_MBR_ALIGNMENT_ALWAYS_START_AT_ZERO
      DVR Property "abrIndexesAlwaysStartWithZero": when doing mbr alignment, always start the alignment at index 0.

      Previous to 4.1.1.03, when DVR aligns single renditions into an ABR stream, it always starts the ABR rendition at index zero, not matter the indexes of the individual streams. The behavior was changed to better accommodate HTTP Origin, where indexes were innappropriately getting re-used after the session was restarted.

      The default is false. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_MBR_ALIGNMENT_CHUNKS_IN_RESERVE

      static final String PROPERTY_MBR_ALIGNMENT_CHUNKS_IN_RESERVE
      DVR Property "dvrAbrAlignmentChunksInReserve": when doing mbr alignment, implement code that ignores n chunks in each chunklist and determines a trim time based on the maximum time of all of the non-reserve chunks. This prevents some alignment issues when one stream is falling behind others

      Introduced in 4.6.0.02

      The default is 0. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_MBR_MINIMIMUM_PACKETTIME_GAP_SIZE

      static final String PROPERTY_MBR_MINIMIMUM_PACKETTIME_GAP_SIZE
      DVR Property "dvrMbrMinimumPacketTimeGapSize": when doing mbr alignment gaps smaller than this are ignored.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_MBR_ALTERNATIVE_MATCH_DELTA

      static final String PROPERTY_MBR_ALTERNATIVE_MATCH_DELTA
      DVR Property "dvrMbrAlternateMatchDelta": when finding alternative for a MBR gap, an alternate is considered a match is within this many ms of the gap in question.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_MBR_ALTERNATIVE_MATCH_DELTA

      static final int DEFAULT_PROPERTY_MBR_ALTERNATIVE_MATCH_DELTA
      Default value for DVR Property "dvrMbrAlternateMatchDelta".

      Default value is 1000 ms.

      See Also:

    • PROPERTY_PACKET_DURATION_MAXIMUM

      static final String PROPERTY_PACKET_DURATION_MAXIMUM
      DVR Property "dvrPacketDurationMaximum": for maximum packet duration, in milliseconds.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_PACKET_DURATION_MAXIMUM

      static final int DEFAULT_PROPERTY_PACKET_DURATION_MAXIMUM
      Default value for DVR Property "dvrChunkDurationMinimum".

      Default value is 5000 ms.

      See Also:

    • DEFAULT_PROPERTY_MBR_MINIMIMUM_PACKETTIME_GAP_SIZE

      static final int DEFAULT_PROPERTY_MBR_MINIMIMUM_PACKETTIME_GAP_SIZE
      Default value for DVR Property "dvrMbrMinimumPacketTimeGapSize".

      Default value is 100 ms.

      See Also:

    • PROPERTY_MBR_MINIMIMUM_UTCTIME_GAP_SIZE

      static final String PROPERTY_MBR_MINIMIMUM_UTCTIME_GAP_SIZE
      DVR Property "dvrMbrMinimumUtcTimeGapSize": when doing mbr alignment gaps smaller than this are ignored.

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_MBR_MINIMIMUM_UTCTIME_GAP_SIZE

      static final int DEFAULT_PROPERTY_MBR_MINIMIMUM_UTCTIME_GAP_SIZE
      Default value for DVR Property "dvrMbrMinimumPacketTimeGapSize".

      Default value is 750 ms.

      See Also:

    • PROPERTY_MAX_RECORDING_LENGTH

      static final String PROPERTY_MAX_RECORDING_LENGTH
      DVR Property "dvrMaximumRecordingLength": The maximum recording length in seconds. Recording stops when it reaches this value.

      Add the property to Application/DVR/Properties section of Application.xml A value of zero means no maximum recording length is enforced. If used in conjunction with DVRWindow, should be slightly larger (1-2%) than DVRWindow.

      See Also:

    • DEFAULT_PROPERTY_MAX_RECORDING_LENGTH

      static final long DEFAULT_PROPERTY_MAX_RECORDING_LENGTH
      Default value for DVR Property "dvrMaximumRecordingLength".

      Default value is 108000 (30 hours)

      See Also:

    • PROPERTY_MEDIACACHE_ENABLED

      static final String PROPERTY_MEDIACACHE_ENABLED
      DVR Property "dvrMediaCacheEnabled"

      Add the property to Application/DVR/Properties section of Application.xml Default is false.

      See Also:

    • PROPERTY_MEDIACACHE_READER_CLASS

      static final String PROPERTY_MEDIACACHE_READER_CLASS
      DVR Property "dvrMediaCacheReaderClass"

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_MEDIACACHE_READER_CLASS

      static final String DEFAULT_PROPERTY_MEDIACACHE_READER_CLASS
      Default value for DVR Property "dvrMediaCacheReaderClass".
      See Also:

    • PROPERTY_DEBUG_LOG_INVALID_CHUNK_DETAILS

      static final String PROPERTY_DEBUG_LOG_INVALID_CHUNK_DETAILS
      DVR Property "dvrLogInvalidChunkDetails": to control detailed logging information of DVR invalid chunks

      The default is false, meaning do not log invalid chunks. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_DEBUG_LOG_INVALID_CHUNK_MATCHER

      static final String PROPERTY_DEBUG_LOG_INVALID_CHUNK_MATCHER
      DVR Property "dvrLogInvalidChunkMatcher": for matching stream names that will log chunk packets

      Only affects logging if PROPERTY_DEBUG_MAX_INVALID_CHUNKS_LOGGED is true.

      See Also:

    • PROPERTY_DEBUG_MAX_INVALID_CHUNKS_LOGGED

      static final String PROPERTY_DEBUG_MAX_INVALID_CHUNKS_LOGGED
      DVR Property "dvrMaxInvalidChunksLogged": for controlling maximum number of invalid DVR chunks logged.

      The default is 10. Logging only occurs if property PROPERTY_DEBUG_LOG_INVALID_CHUNK_DETAILS is true. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_DEBUG_MAX_INVALID_CHUNKS_LOGGED

      static final int DEFAULT_PROPERTY_DEBUG_MAX_INVALID_CHUNKS_LOGGED
      Default value for DVR Property "dvrMaxInvalidChunksLogged".

      Default value is 10.

      See Also:

    • PROPERTY_DEBUG_LOG_VALID_CHUNK_DETAILS

      static final String PROPERTY_DEBUG_LOG_VALID_CHUNK_DETAILS
      DVR Property "dvrLogValidChunkDetails": to control detailed logging information of DVR valid chunks

      The default is false, meaning do not log valid chunks. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_DEBUG_MAX_VALID_CHUNKS_LOGGED

      static final String PROPERTY_DEBUG_MAX_VALID_CHUNKS_LOGGED
      DVR Property "dvrMaxValidChunksLogged": for controlling maximum number of valid DVR chunks logged.

      The default is 10. Logging only occurs if property PROPERTY_DEBUG_LOG_VALID_CHUNK_DETAILS is true. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_DEBUG_MAX_VALID_CHUNKS_LOGGED

      static final int DEFAULT_PROPERTY_DEBUG_MAX_VALID_CHUNKS_LOGGED
      Default value for DVR Property "dvrMaxValidChunksLogged".

      Default value is 10.

      See Also:

    • PROPERTY_DEBUG_LOG_VALID_CHUNK_MATCHER

      static final String PROPERTY_DEBUG_LOG_VALID_CHUNK_MATCHER
      DVR Property "dvrLogValidChunkMatcher": for matching stream names that will log chunk packets

      Only affects logging if PROPERTY_DEBUG_MAX_VALID_CHUNKS_LOGGED is true.

      See Also:

    • PROPERTY_DEBUG_TOSSED_HOLDERS

      static final String PROPERTY_DEBUG_TOSSED_HOLDERS
      DVR Property "dvrDebugTossedHolders": for turning on logging of packets that are being tossed.

      Valid values are "true" or "false". Default is false.

      See Also:

    • PROPERTY_DEBUG_RAW_PACKETS

      static final String PROPERTY_DEBUG_RAW_PACKETS
      DVR Property "dvrDebugRawPackets": for turning on logging of incoming raw packets.

      Valid values are "true" or "false".

      See Also:

    • DEFAULT_PROPERTY_DEBUG_RAW_PACKETS

      static final boolean DEFAULT_PROPERTY_DEBUG_RAW_PACKETS
      Default value for DVR Property "dvrDebugRawPackets".

      Default value is false.

      See Also:

    • PROPERTY_DEBUG_RAW_PACKETS_MATCHER

      static final String PROPERTY_DEBUG_RAW_PACKETS_MATCHER
      DVR Property "dvrDebugRawPacketsMatcher": for matching stream names that will dump raw packet.

      Only affects logging if PROPERTY_DEBUG_RAW_PACKETS is true.

      See Also:

    • PROPERTY_DEBUG_MAXIMUM_RAW_PACKETS

      static final String PROPERTY_DEBUG_MAXIMUM_RAW_PACKETS
      DVR Property "dvrDebugMaximumRawPackets": for setting maximum number of logged raw packets.

      Valid values is an integer. 0 means there is no limit.

      Only affects logging if PROPERTY_DEBUG_RAW_PACKETS is true.

      See Also:

    • DEFAULT_PROPERTY_DEBUG_MAX_RAW_PACKETS

      static final int DEFAULT_PROPERTY_DEBUG_MAX_RAW_PACKETS
      Default value for DVR Property "dvrDebugMaximumRawPackets".

      Default value is 200 log statements.

      See Also:

    • PROPERTY_DEBUG_STATE_CHANGE

      static final String PROPERTY_DEBUG_STATE_CHANGE
      DVR Property "dvrDebugStateChange": for logging state changes of DVR store.
      See Also:

    • PROPERTY_DEBUG_CHUNK_RETRIEVALS

      static final String PROPERTY_DEBUG_CHUNK_RETRIEVALS
      DVR Property "dvrDebugChunkRetrievals": for logging each chunk retrieval
      See Also:

    • PROPERTY_DEBUG_FAILED_CHUNK_RETRIEVALS

      static final String PROPERTY_DEBUG_FAILED_CHUNK_RETRIEVALS
      DVR Property "dvrDebugFailedChunkRetrievals": for logging info about each failed chunk retrieval
      See Also:

    • PROPERTY_MAX_CHUNK_LOG

      static final String PROPERTY_MAX_CHUNK_LOG
      DVR Property "dvrMaxChunkLogCount": for maximum number of DVR chunks to log.

      Maximum number of chunks to log recording information about in the wowzamedia_access.log file. As recording is continued past this value, there is no feedback for normal operation in the log. View directories and files created in [install-dir]/dvr for on-going feedback that recording is occurring. Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_DVR_MAX_CHUNK_LOG

      static final int DEFAULT_PROPERTY_DVR_MAX_CHUNK_LOG
      Default value for DVR Property "dvrMaxChunkLogCount".

      Default value is 10 logging statements.

      See Also:

    • PROPERTY_MAX_RECALC_DURATION_LOG

      static final String PROPERTY_MAX_RECALC_DURATION_LOG
      DVR Property "dvrMaxRecountDurationLogCount": for maximum number of messages to log regarding recalculating DVR chunk duration

      Maximum number of log statements recorded regarding chunk duration being recalculated. A value less than 0 means all statements will be logged with no limit.

      See Also:

    • DEFAULT_PROPERTY_MAX_RECALC_DURATION_LOG

      static final int DEFAULT_PROPERTY_MAX_RECALC_DURATION_LOG
      Default value for DVR Property "dvrMaxRecountDurationLogCount".

      Default value is 30 logging statements.

      See Also:

    • PROPERTY_DEBUG_METHODS

      static final String PROPERTY_DEBUG_METHODS
      DVR Property "dvrDebugManagerLogMethods": for turning on DVR Manager debug logging.

      Valid values are "true" or "false".

      Add the property to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_DEBUG_REPEATER

      static final String PROPERTY_DEBUG_REPEATER
      DVR Property "dvrDebugRepeater": for turning on logging of DVR repeater

      Valid values are "true" or "false".

      See Also:

    • PROPERTY_DEBUG_PLAYER_ADAPTER

      static final String PROPERTY_DEBUG_PLAYER_ADAPTER
      HTTP Streamer Property "dvrDebugPlayerAdapter": for turning on DVR Player Adapter debug logging for all streamer types.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_SMOOTH_PLAYER_ADAPTER

      static final String PROPERTY_DEBUG_SMOOTH_PLAYER_ADAPTER
      HTTP Streamer Property "dvrDebugSmoothPlayerAdapter": for turning on DVR Player Smooth Adapter debug logging.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_SANJOSE_PLAYER_ADAPTER

      static final String PROPERTY_DEBUG_SANJOSE_PLAYER_ADAPTER
      HTTP Streamer Property "dvrDebugSanJosePlayerAdapter": for turning on DVR Player San Jose Adapter debug logging.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_CUPERTINO_PLAYER_ADAPTER

      static final String PROPERTY_DEBUG_CUPERTINO_PLAYER_ADAPTER
      HTTP Streamer Property "dvrDebugCupertinoPlayerAdapter": for turning on DVR Player Cupertino Adapter debug logging.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_MPEGDASH_PLAYER_ADAPTER

      static final String PROPERTY_DEBUG_MPEGDASH_PLAYER_ADAPTER
      HTTP Streamer Property "dvrDebugMPEGDashPlayerAdapter": for turning on DVR Player MPEG-DASH Adapter debug logging.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_MBR_PLAYER_ADAPTER

      static final String PROPERTY_DEBUG_MBR_PLAYER_ADAPTER
      HTTP Streamer or DVR Property "dvrDebugMbrPlayerAdapter": for turning on DVR MBR Player Adapter debug logging.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_MBR_PLAYER_ADAPTER_IF_SHIFTED_EMPTY

      static final String PROPERTY_DEBUG_MBR_PLAYER_ADAPTER_IF_SHIFTED_EMPTY
      HTTP Streamer or DVR Property "dvrDebugMbrPlayerAdapter": for turning on DVR MBR Player Adapter debug logging when null shifted entries is returned.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_MBR_DETAILS_WHEN_RECORD_DNE

      static final String PROPERTY_DEBUG_MBR_DETAILS_WHEN_RECORD_DNE
      HTTP Streamer or DVR Property "dvrDebugMbrDetailsWhenRecordDNE": for turning on DVR MBR Player Adapter debug logging.

      Valid values are "true" or "false". (Default is false)

      Add this property to Application/HTTPStreamer/Properties.

      See Also:

    • PROPERTY_DEBUG_MBR_ALIGNMENT

      static final String PROPERTY_DEBUG_MBR_ALIGNMENT
      HTTP Streamer or DVR Property "dvrDebugMbrAlignment": for turning on logging of mbr alignment

      Valid values are "true" or "false". Default is false.

      See Also:

    • PROPERTY_DEBUG_MBR_ALIGNMENT_RESOLUTION

      static final String PROPERTY_DEBUG_MBR_ALIGNMENT_RESOLUTION
      DVR Property "dvrDebugMbrAlignmentResolution": for turning on logging of mbr alignment resolution (requested to actual)

      Valid values are "true" or "false". Default is false.

      See Also:

    • PROPERTY_DEBUG_PLAYLIST_REQUEST

      static final String PROPERTY_DEBUG_PLAYLIST_REQUEST
      DVR Property "dvrDebugPlaylistRequest": for turning on logging of DVR playlist requests.

      Valid values are "true" or "false". Default is false.

      See Also:

    • PROPERTY_DEBUG_CHANNEL_MANIFEST

      static final String PROPERTY_DEBUG_CHANNEL_MANIFEST
      DVR Property "dvrDebugChannelManifest": for turning on logging of DVR channel manifests.

      Valid values are "true" or "false". Default is false.

      See Also:

    • DEFAULT_PROPERTY_DEBUG_CHANNEL_MANIFEST

      static final boolean DEFAULT_PROPERTY_DEBUG_CHANNEL_MANIFEST
      See Also:

    • PROPERTY_PLAYLIST_REQUEST_DELEGATE

      static final String PROPERTY_PLAYLIST_REQUEST_DELEGATE
      DVR Property "dvrPlaylistRequestDelegate": used to over-ride the class that generates a playlist request.

      The delegate should extend DvrBasePlaylistRequestFactory

      If unspecified, the standard DVR-time based delegate DEFAULT_PLAYLIST_REQUEST_DELEGATE is used

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PLAYLIST_REQUEST_DELEGATE

      static final String DEFAULT_PLAYLIST_REQUEST_DELEGATE
      See Also:

    • PROPERTY_ENCRYPTION_INFO_DELEGATE

      static final String PROPERTY_ENCRYPTION_INFO_DELEGATE
      DVR Property "dvrPlaylistEncryptionInfoDelegate": used to over-ride the encryption info on the playback side.

      The specified delegate should extend com.wowza.wms.dvr.DvrBaseEncryptionInfoDelegate

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_STREAM_ONLY_LIVE_STREAMS

      static final String PROPERTY_STREAM_ONLY_LIVE_STREAMS
      DVR Property "dvrStreamOnlyLiveStreams": used to allow only streaming of 'live' DVR streams. This means the DVR stream must actively be recording to be streamed. If not live, the streaming session will timeout when connecting.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_SANJOSE_PLAYLIST_MIMETYPE

      static final String PROPERTY_SANJOSE_PLAYLIST_MIMETYPE
      DVR Property "dvrSanJosePlaylistMimeType": used to over-ride the mime type for DVR San Jose F4m playlists.

      Default value is "video/mp4"

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_SANJOSE_PLAYLIST_DELIVERYTYPE

      static final String PROPERTY_SANJOSE_PLAYLIST_DELIVERYTYPE
      DVR Property "dvrSanJosePlaylistDeliveryType": used to over-ride the mime type for DVR San Jose F4m playlists.

      Default value is "streaming"

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_SANJOSE_PLAYLIST_VERSION

      static final String PROPERTY_SANJOSE_PLAYLIST_VERSION
      DVR Property "dvrSanJosePlaylistVersion": used to over-ride the version of the San Jose f4m playlist.

      Default value is "2.0". Valid values are "1.0" and "2.0".

      See Also:

    • PROPERTY_SANJOSE_PLAYLIST_RECORDED_STREAMTYPE

      static final String PROPERTY_SANJOSE_PLAYLIST_RECORDED_STREAMTYPE
      DVR Property "dvrSanJosePlaylistRecordedStreamType": used to over-ride the stream type for non-live (recorded) DVR in San Jose f4m playlists.

      Default value is #SANJOSE_F4M_STREAMTYPE_RECORDED. *

      See Also:

    • PROPERTY_SANJOSE_PLAYLIST_LIVE_STREAMTYPE

      static final String PROPERTY_SANJOSE_PLAYLIST_LIVE_STREAMTYPE
      DVR Property "dvrSanJosePlaylistLiveStreamType": used to over-ride the stream type for live DVR in San Jose f4m playlists.

      Default value is #SANJOSE_F4M_STREAMTYPE_DVR.

      See Also:

    • SANJOSE_F4M_STREAMTYPE_DVR

      static final String SANJOSE_F4M_STREAMTYPE_DVR
      Constant for San Jose stream type "dvr".
      See Also:

    • SANJOSE_F4M_STREAMTYPE_RECORDED

      static final String SANJOSE_F4M_STREAMTYPE_RECORDED
      Constant for San Jose stream type "recorded".
      See Also:

    • SANJOSE_F4M_STREAMTYPE_LIVE

      static final String SANJOSE_F4M_STREAMTYPE_LIVE
      Constant for San Jose stream type "live".
      See Also:

    • SANJOSE_F4M_STREAMTYPE_LIVEORRECORDED

      static final String SANJOSE_F4M_STREAMTYPE_LIVEORRECORDED
      Constant for San Jose stream type "liveOrRecorded".
      See Also:

    • SANJOSE_F4M_VERSION_1_0

      static final String SANJOSE_F4M_VERSION_1_0
      Constant for San Jose f4m version "1.0".
      See Also:

    • SANJOSE_F4M_VERSION_2_0

      static final String SANJOSE_F4M_VERSION_2_0
      Constant for San Jose f4m version "2.0".
      See Also:

    • SANJOSE_F4M_STREAMINGTYPE_STREAMING

      static final String SANJOSE_F4M_STREAMINGTYPE_STREAMING
      Constant for San Jose streaming type "streaming"
      See Also:

    • MIMETYPE_VIDEO_MP4

      static final String MIMETYPE_VIDEO_MP4
      Constant for mime type "video/mp4"
      See Also:

    • PROPERTY_SANJOSE_ABST_TIMESCALE

      static final String PROPERTY_SANJOSE_ABST_TIMESCALE
      DVR Property "dvrSanJosePlaylistAbstTimescale": used to over-ride the time-scale for abst files.

      Default value is #SANJOSE_ABST_DEFAULT_TIMESCALE (1000), which means milliseconds.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_SANJOSE_ABST_DURATION_TOLERANCE

      static final String PROPERTY_SANJOSE_ABST_DURATION_TOLERANCE
      DVR Property "dvrSanJosePlaylistAbstDurationEqualityTolerance": used to over-ride the tolerance when determining equal chunks lengths.

      Default value is #SANJOSE_ABST_DEFAULT_DURATION_EQUALITY_TOLERANCE (50), which means 50 milliseconds.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SANJOSE_ABST_TIMESCALE

      static final int DEFAULT_PROPERTY_SANJOSE_ABST_TIMESCALE
      Default value for property "dvrSanJosePlaylistAbstTimescale" #see PROPERTY_SANJOSE_ABST_TIMESCALE
      See Also:

    • DEFAULT_PROPERTY_SANJOSE_ABST_DURATION_TOLERANCE

      static final int DEFAULT_PROPERTY_SANJOSE_ABST_DURATION_TOLERANCE
      Default value for property "dvrSanJosePlaylistAbstDurationTolerance" #see PROPERTY_SANJOSE_ABST_DURATION_TOLERANCE
      See Also:

    • PROPERTY_CUPERTINO_PLAYLIST_FORCE_LIVE

      static final String PROPERTY_CUPERTINO_PLAYLIST_FORCE_LIVE
      DVR Property "dvrCupertinoPlaylistForceLive": used to override playlist request delegate logic that determines if playlist is live.

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_CUPERTINO_PLAYLIST_FORCE_NONLIVE

      static final String PROPERTY_CUPERTINO_PLAYLIST_FORCE_NONLIVE
      DVR Property "dvrCupertinoPlaylistForceLive": used to override playlist request delegate logic that determines if playlist is live versus non-live.

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_CUPERTINO_ON_CHUNK_START_RESET_COUNTER

      static final String PROPERTY_CUPERTINO_ON_CHUNK_START_RESET_COUNTER
      DVR Property "dvrCupertinoOnChunkStartResetCounter": when a new chunk starts, reset internal tsPacketizer counters

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_CUPERTINO_PLAYLIST_ALLOW_CACHING

      static final String PROPERTY_CUPERTINO_PLAYLIST_ALLOW_CACHING
      DVR Property "dvrCupertinoPlaylistAllowCaching": used to force Cupertino playlist to set #EXT-X-ALLOW-CACHE: value

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_CUPERTINO_PUT_END_TAG_BEFORE_CHUNKS

      static final String PROPERTY_CUPERTINO_PUT_END_TAG_BEFORE_CHUNKS
      DVR Property "dvrCupertinoPutEndTagBeforeChunks": if set to true, puts the EXT-X-ENDLIST before the DVR chunks.

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_CUPERTINO_PUT_END_TAG_IF_PLAYLIST_DURATION_REACHED

      static final String PROPERTY_CUPERTINO_PUT_END_TAG_IF_PLAYLIST_DURATION_REACHED
      DVR Property "dvrCupertinoPutEndTagIfPlaylistDurationReached": if set to true, puts the EXT-X-ENDLIST tag after DVR chunks only when a DVR playlist's duration has been specified in a request, and it's calculated end time has been reached for streams that are still recording.

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_CUPERTINO_PUT_END_TAG_IF_PLAYLIST_DURATION_REACHED

      static final boolean DEFAULT_CUPERTINO_PUT_END_TAG_IF_PLAYLIST_DURATION_REACHED
      Default value for property "dvrCupertinoPutEndTagIfPlaylistDurationReached" #see PROPERTY_CUPERTINO_PUT_END_TAG_IF_PLAYLIST_DURATION_REACHED
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_SEEK

      static final String PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_SEEK
      DVR Property "dvrSmoothManifestLiveCanSeek": used to determine is CanSeek is enabled in smooth Manifest.

      Default value is #DEFAULT_PROPERTY_SMOOTH_LIVE_CAN_SEEK, which is set to true.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_SEEK

      static final boolean DEFAULT_PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_SEEK
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_PAUSE

      static final String PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_PAUSE
      DVR Property "dvrSmoothManifestLiveCanPause": used to determine is CanPause is enabled in smooth Manifest.

      Default value is #DEFAULT_PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_PAUSE, which is set to true.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_PAUSE

      static final boolean DEFAULT_PROPERTY_SMOOTH_MANIFEST_LIVE_CAN_PAUSE
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_SEEK

      static final String PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_SEEK
      DVR Property "dvrSmoothManifestRecordedCanSeek": used to determine is CanSeek is enabled in smooth Manifest.

      Default value is #DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_SEEK, which is set to true.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_SEEK

      static final boolean DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_SEEK
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_PAUSE

      static final String PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_PAUSE
      DVR Property "dvrSmoothManifestRecordedCanPause": used to determine is CanPause is enabled in smooth Manifest.

      Default value is #DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_PAUSE, which is set to true.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_PAUSE

      static final boolean DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_CAN_PAUSE
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_RECORDED_SPECIFY_DURATION

      static final String PROPERTY_SMOOTH_MANIFEST_RECORDED_SPECIFY_DURATION
      DVR Property "dvrSmoothManifestRecordedSpecifyDuration": used to determine if duration is specified. If not duration of zero is shown.

      Default value is #DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_SPECIFY_DURATION, which is set to true.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_SPECIFY_DURATION

      static final boolean DEFAULT_PROPERTY_SMOOTH_MANIFEST_RECORDED_SPECIFY_DURATION
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_MAJOR_VERSION

      static final String PROPERTY_SMOOTH_MANIFEST_MAJOR_VERSION
      DVR Property "dvrSmoothManifestMajorVersion": used to determine Smooth manifest major version

      Default value is #DEFAULT_PROPERTY_SMOOTH_MANIFEST_MAJOR_VERSION.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_MAJOR_VERSION

      static final int DEFAULT_PROPERTY_SMOOTH_MANIFEST_MAJOR_VERSION
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_MINOR_VERSION

      static final String PROPERTY_SMOOTH_MANIFEST_MINOR_VERSION
      DVR Property "dvrSmoothManifestMinorVersion": used to determine Smooth manifest major version

      Default value is #DEFAULT_PROPERTY_SMOOTH_MANIFEST_MINOR_VERSION.

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_SMOOTH_MANIFEST_MINOR_VERSION

      static final int DEFAULT_PROPERTY_SMOOTH_MANIFEST_MINOR_VERSION
      See Also:

    • PROPERTY_SMOOTH_MANIFEST_VERBOSE_DURATION

      static final String PROPERTY_SMOOTH_MANIFEST_VERBOSE_DURATION
      DVR Property "dvrSmoothManifestVerboseDuration": used to force Smooth Manifest to include durations for each record

      Default value is false

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_SMOOTH_MANIFEST_H264_CODEC

      static final String PROPERTY_SMOOTH_MANIFEST_H264_CODEC
      DVR Property "dvrSmoothManifestH264Codec": used to force Smooth Manifest to use this as its FourCC H264 codec info.

      Default value is set by Smooth Streaming

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • PROPERTY_STREAM_DATA

      static final String PROPERTY_STREAM_DATA
      See Also:

    • PROPERTY_CUPERTINO_ENABLE_DATE_EVENTS

      static final String PROPERTY_CUPERTINO_ENABLE_DATE_EVENTS
      HTTP Streamer Property "dvrCupertinoEnableDataEvents": used to stream ID3 data for HLS DVR streams

      Default value is true

      Add this to Application/HTTPStreamer/Properties section of Application.xml

      See Also:

    • PROPERTY_CUPERTINO_PLAYLIST_DISC_AT_ALTERNATES

      static final String PROPERTY_CUPERTINO_PLAYLIST_DISC_AT_ALTERNATES
      HTTP Streamer Property "dvrCupertinoPlaylistDiscontinuityAtAlternates": used to insert discontinuity tags into HLS stream if DVR store switches mid-playist. The DVR store switches when alternates are pulled form other renditions to fill gaps.

      Default value is true

      Add this to Application/HTTPStreamer/Properties section of Application.xml

      See Also:

    • PROPERTY_MPEG_DASH_PLAYLIST_USE_GZIP

      static final String PROPERTY_MPEG_DASH_PLAYLIST_USE_GZIP
      DVR Property "dvrMPEGDashPlaylistUseGzip": used to enable creation MPEG-DASH playlists with GZIP encoding

      Default value is true

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_PROPERTY_MPEG_DASH_PLAYLIST_USE_GZIP

      static final boolean DEFAULT_PROPERTY_MPEG_DASH_PLAYLIST_USE_GZIP
      See Also:

    • PROPERTY_MPEG_DASH_PLAYLIST_GZIP_THRESHOLD

      static final String PROPERTY_MPEG_DASH_PLAYLIST_GZIP_THRESHOLD
      DVR Property "dvrMPEGDashPlaylistGzipThreshold": when playlist is larger than this number of bytes, and gzip is enabled and accepted by the requesting client, the playlist will be compressed

      Default value is DEFAULT_MPEG_DASH_PLAYLIST_GZIP_THRESHOLD

      Add this to Application/DVR/Properties section of Application.xml

      See Also:

    • DEFAULT_MPEG_DASH_PLAYLIST_GZIP_THRESHOLD

      static final int DEFAULT_MPEG_DASH_PLAYLIST_GZIP_THRESHOLD
      Default value for property "dvrMPEGDashPlaylistGzipThreshold" #see PROPERTY_MPEG_DASH_PLAYLIST_GZIP_THRESHOLD
      See Also: