Try:
publisher.setHostname(“fli003.dc1.hwcdn.net”);
publisher.setPort(1935);
publisher.setDstApplicationName(“zzz”);
publisher.setDstStreamName(“fli/444444-test2?encoderuser=user**&**encoderpassword=password”);
Try:
publisher.setHostname(“fli003.dc1.hwcdn.net”);
publisher.setPort(1935);
publisher.setDstApplicationName(“zzz”);
publisher.setDstStreamName(“fli/444444-test2?encoderuser=user**&**encoderpassword=password”);
Weird. This is exactly how I used Highwinds last month and it worked.
Easy Charlie, I’m not complaining, just trying to help Austin.
No issue here with push and Highwinds …
Austin, what you need to know is not so far (Page 5) starting here.
You need to set encoder IP address on HW side, no need to use PushPublishRTMPAuthProviderAdobe, credentials are set in stream name and finally don’t forget ampersand …
Would it be possible to have the logging configured in such a way as to have the category of “pushPublish” rather than INFO server comment. If you were to change that then we wold be able to use something like
pushPublish appender
log4j.appender.pushPublish=org.apache.log4j.DailyRollingFileAppender
log4j.appender.pushPublish.DatePattern=’.'yyyy-MM-dd
log4j.appender.pushPublish.File=${com.wowza.wms.ConfigHome}/logs/wowzamediaserver_pushPublish.log
log4j.appender.pushPublish.layout=com.wowza.wms.logging.ECLFPatternLayout
log4j.appender.pushPublish.layout.Fields=date,time,tz,x-event,x-category,x-severity,x-status,x-ctx,x-comment
log4j.appender.pushPublish.layout.OutputHeader=true
log4j.appender.pushPublish.layout.QuoteFields=false
log4j.appender.pushPublish.layout.Delimeter=tab
log4j.appender.pushPublish.layout.CategoryInclude=pushPublish
etc. Unless there is another way with log4j magic?
Thanks, Joe
To see published streams in JConsole you have to add IMediaStream to /conf/Server.xml /AdminInterface /ObjectList
Richard
I have done that and new tree item MediaStream appears, still no status or info for published streams
Two questions:
Should the publishers all be configured in the : onPublish -> synchronized(publishers) {} block? How would this be done because won’t publishers.put(), publishers.remove() only allow one unique stream in the collection?
i.e. this won’t work right?
publishers.put(stream, publisher1);
publishers.put(stream, publisher2);
Thanks!
We haven’t had a chance to breakout the IDE and a test environment to try this yet. We just got a copy of the package and I was reviewing the sample for our use case, and noticed the possible issue.
Hi,
We are trying to use this module to push a stream to a destination that takes the form:
rtmp://(IP address]:1935/[app name]/[stream name] or
rtmp://(IP address]:1935/[app name]?[parameter list]/[stream name]
We try to achieve this with this bit of code:
// Destination stream
publisher.setHostname("[IP address]");
publisher.setPort(1935);
publisher.setDstApplicationName("[app name](?[parameter list])");
publisher.setDstStreamName("[stream name]");
It seems that doing so the module inserts an additional level definst to make the final URL: rtmp://(IP address]:1935/[app name](?[parameter list])/definst/[stream name].
Is it possible to not have this level automatically inserted? And if so, how should we modify the destination stream definition to do so?
Two further questions would be:
is there a maximum length that the application or stream name can have, and
can push-publish handle a parameter list preceded by a question mark
Thanks,
Peter
Hi Peter,
I have the module working with BitGravity, they don’t allow to transmit from this module to the Production origin.
If you need support please contact me.
Regards,
Alejandro
Peter,
The BG guys, in my case don’t allow to transmit to the Principal Origin, they disconnect me, I have talking with them and they are changed my Origin URL to uno PREWIEV Origin, this way works much better.
Possible you can have a similar issue, talk with them about your needs, they have a very good support too.
Regards,
Ale
Hi Austin, I have the module working with bitGravity, I can try to modify for use Highwinds, but i don’t have one account, contact me in private if you can give me one account for test.
Regards,
Ale
wmconsulting.info
Thanks Charlie,
I have the same issue… I have made a workarround using the /etc/hosts file into my linux system this way never need go to DNS but of course this workarround is horrible…
Regards,
Ale
Pete,
I have tested with my version of pushPublish module with success in Highwinds and BitGravity, if you can provide me an account into CDNetworks we can test this… let me know…
Regards,
Alejandro
Hi Guys,
How I can setting the userAgent when I use PushPublish module? currently into the log of the Origin I see “WowzaProLiveRepeater” and I would like to use “FMLE”/“Wirecast” or something more compatible with current encoders.
Thanks,
Ale
You might try:
publisher.setHostname(InetAddress.getByName(“1.6960364.fme.ustream.tv”));
Charlie
Charlie, I’m try to apply this fix but the IDE show me this Warning:
The method setHostname(String) in the type PushPublisherRTMP is not applicable for the arguments (InetAddress)
Can you please help me?
Your problem is this: java.nio.channels.UnresolvedAddressException
Check two post before Push Publishing AddOn package to push stream to CDNs and service providers
Richard/Charlie,
Can help with some example for stream to multiple servers the same Stream.
I have the module working well with one destination, but I don’t understand how use the API for stream the same content to a Backups server, say the other way, the same source to 2 destinations.
Thanks
Ale
in my cases this params is NOT working
publisher.setRemoveDefaultAppInstance(true);
Possible this break the string adding like the logs show:
rtmp://p.ep49790.i.akamaientrypoint.net:1935/EntryPoint/definst/wowza_push_test@49790]
Good morning,
It appears that I have a connection to edgecast from a stream as I see no errors in the log using the simple example with my specifics in it. However I am not sure how to tell any other data. Would the connectioncounts XML show outbound byte count if it was sending data or do I need to change something for that? Is there any other place to confirm that the stream is being pushed successfully or is there something to put in my module to tell me that?
Any help would be great.
Thanks
© 2007–2024 Wowza Media Systems™, LLC. All rights reserved. Security & Privacy PolicyLegalSystem Status