Results 1 to 2 of 2

Thread: Digital Rapids Stream encoder + ModuleRTMPAuthenticate fails to authenticate

  1. #1
    Join Date
    Feb 2010
    Posts
    2

    Default Digital Rapids Stream encoder + ModuleRTMPAuthenticate fails to authenticate

    I am setting up encoding from the Digital Rapids encoder into Wowza, using the ModuleRTMPAuthenticate module for authenticating the encoder. I then set the digital rapids encoder to use ‘server with authentication’. However, it doesn’t work - it says ‘failed to start encoding’ and if I hover over the first stream it says ‘unable to publich broadcast stream’.

    If I disable authentication on Wowza, the streaming works OK. If I use FMLE, it authenticates OK.

    I am using Digital Rapids Stream version 3.4.0b35 and Wowza 3.0.4

  2. #2
    Join Date
    Dec 2007
    Posts
    21,962

    Default

    Sorry for delay. Here is an alternative method of securing publishing:

    http://www.wowza.com/forums/content....for-Publishing

    I would consult with DR regarding the other method if you prefer it.

    Richard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •