Hello. I am trying to view a live stream from Wowza Streaming Cloud in my iOS app using the GoCoder SDK. I am streaming from an IP camera that outputs and RTSP. I am unsure what to use for the host address, application name, and stream name for configuring the stream in Xcode.
Hi @Jake Warren I have a tutorial for you that will walk you through this step by step and show you what to enter where in Xcode.
https://www.youtube.com/watch?v=EkVrikrk4JU&list=PLDA4I83jF6ZtUazHsXHIvgJaKY9I4AGK4&index=6
But, be aware that the GoCoder SDK only plays back the proprietary WOWZ protocol or HLS as a fallback. You’ll need to transmux that RTSP for playback in a GoCoder SDK app. See how to do that in this article.
Hi @Rose Power-Wowza Community Manager,
Thanks for responding. Instead of using Wowza GoCoder for the camera/encoder I am using IP camera. The Wowza GoCoder gives you a primary server address, stream name and host port, while the IP camera gives hosted page URL, Source URL and playback URL. I still am unsure of what to use for the config. I am trying to view a stream from my IP Camera that is on Streaming Cloud.
Thanks again,
Jake
The only way you can play back a stream in an app built with the GoCoder SDK @Jake Warren is to use the WOWZ protocol in an ultra low latency stream target or set up HLS as a fallback.
As far as the IP camera and where to enter that, I can send you some info on that. It may be referencing Engine, but it’s the same concept for Cloud.
